I can't make any changes to these settings on either a Window's 7 or Window's XP machine. Any ideas? Thanks!

Dan

 

Does not work with Mac and ECU Flash 1.38.2080 either... I am using the most current ECU Flash on the Window's versions.

I am having a very annoying idle dip after letting off throttle and want to fix. Please help!

Dan

 

I wouldn't worry about it. Those definitions are wrong.

 

Fair enough, but then what would be my plan of attack for fixing the off idle issue?

I have spent a fair amount of time trying to get the idle perfect on this car (both mechanically and with the tune) and this last part that bugs me is just completely ticking me off!

Thanks for the help.

Dan

 

Any additional ideas? Does someone have the right definitions?

Dan

 

First set your biss correctly. Second try adjusting your Decel Fuel cut delay. Third log your timing vs rpm dip and add a little timing to help with the dip.

 

Thanks for the advice, I have already adjusted BISS according to the service manual, but I will look into Decel Fuel Cut Delay and timing. I will report back with results. I will do some research, but any specific information of what I should be looking for with Decel Fuel Cut Delay?

Thanks!

Dan

 

Lower the numbers by 5-10% In your problem load areas

 

I don't see Decel Fuel Cut Delay as an option on the rom. Am I missing something? I am using xml definitions from the Tephra v7 thread.

Dan

 

Deleted