+1. Lets get some results today, I really want a set of these!

 

I would like a set. I have an appointment with TT on july 27 and I want cams but I don't want to pay 1000 for a set when I can get one for 599. Will this problem be resolved by then?

 

exactly what he said ^^ i want these cams cause i waiting to get them so i can get my car dynoed but it seems like it keeps getting longer and longer for the relaese date i know theres nothing greg can do about it but i think "somebody" or whoever is testing these cams should just spend a good rock solid full day tuning and working out the "bugs" on thses things so we can get the ball rolling thats just my input i know shops are very busy and have other things to do but iam guessing that if these cams keep being put to the back burner that ppl are gonna cancel there orders and go somewhere else,

 

I have these cams being tested on my car at ams as we speak. They have been working on it for the past three weeks. I would rather wait a couple weeks to make sure they work then have them rush a product that doesn't make power or worse is bad for your motor. Be patient and see what happens. Thanks.

 

Damn, give me your tt appointment! I took off july 27th cause its my bday but I heard they're booked solid for it.

 

taken offers for my appointment at TT on july 27th LOL

 

any #'s yet?

 

yeah some raw numbers?

 

Looks like we have to wait a little bit longer. My car was at ams today for diagnosis and from what I was told it was the cam and not the mivec. They did a compression test and it came up low. I will let greg explain it a little better if he wants because I really am not the best source for technical things. But I have to say I'm not getting the run around. Ams and gsc have been keeping me updated so just be patient and we should have some high hp stock turbos evo ix shortly. Thanks.

 

You're getting an inside look into development. Nothing every comes out right the first time. Or the first dozen times.

I rather wait a year or more for perfect cams, then three weeks for untested cams .

It's my understanding the pin placement on the cam may have been off. Everybody sit tight and let Greg work out the kinks. In due time, these will be released.

 

we have a slight problem i will be getting the intake cam back to messure the oil passages on it, i feel they might be the wrong size. we will check them out and get to the bottom of it as soon as possible. the lower compression is do to over lap the mivac has the cam clocked all the way retarded. wroblewskievo just wanted to say thanks for donating your ride. i told ams to leave the exhaust cam in the car and we will get the intake cam figured out for you.

 

Subscribed. Looking to pick up a set before Al makes his way to Seattle to tune!!!

 

cant wait to see the results! was wondering is this on a stock 9 or what mods are done to it already??

 

basically an AMS stage 1 car. flash, tbe, and intake. wroblewskievo can tell you more.

 

Ams tbe,blitz drop in filter, ams intercooler, ams licp, and a tune once the cam gets fixed. Hey greg do you need ams to take out the intake cam and send it to you. From your post that's what it sounded like. I talked to ams about it and they had know idea what I was talking about. Thanks.