EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

20G injectors

Thread Tools
 
Search this Thread
 
Old Feb 18, 2007 | 03:59 PM
Share
  #1  
DS-03evo's Avatar
DS-03evo
Thread Starter
Evolved Member
iTrader: (21)
 
Joined: Nov 2006
Posts: 822
Likes: 0
From: Central PA
20G injectors
What cc injector's would I need to run a 20g turbo?
Reply
0
Old Feb 18, 2007 | 04:55 PM
Share
  #2  
EvoTech's Avatar
EvoTech
Evolved Member
iTrader: (25)
 
Joined: Feb 2004
Posts: 1,424
Likes: 1
From: Long Island
660 will do it. You want the smallest injector that you can get to run a around 85% duty cycle at max boost.
Reply
0
Old Feb 18, 2007 | 05:25 PM
Share
  #3  
DS-03evo's Avatar
DS-03evo
Thread Starter
Evolved Member
iTrader: (21)
 
Joined: Nov 2006
Posts: 822
Likes: 0
From: Central PA
Should I go with a certain brand, or whatever I can find for the cheapest?
Reply
0
Old Feb 18, 2007 | 05:47 PM
Share
  #4  
SWOLN's Avatar
SWOLN
Evolved Member
20 Year Member
Photogenic
Liked
Loved
iTrader: (6)
 
Joined: Sep 2005
Posts: 1,791
Likes: 13
From: In the Florida Swamps
660's if you are just running pump gas, but if later you run c16 or meth you'll need bigger. IMO 720's
Reply
0
Old Feb 18, 2007 | 05:56 PM
Share
  #5  
joeMama's Avatar
joeMama
Evolving Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 197
Likes: 0
From: SHadey Brook NY
I have 720's in preparation, but 660's will be fine.
Reply
0
Old Feb 18, 2007 | 06:01 PM
Share
  #6  
Sgt Blamo's Avatar
Sgt Blamo
Evolved Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 796
Likes: 0
From: South Florida
I would buy my injectors from either of these two Evom vendors:
http://www.buschurracing.com/
or
http://www.extremepsi.com/store/cust...Fuel+Injectors

I'm going with 880's, but I have an EMS, you should go with at least 720's depending on your mods.
Reply
0
Old Feb 18, 2007 | 06:02 PM
Share
  #7  
Ultimate CC's Avatar
Ultimate CC
Account Disabled
iTrader: (122)
 
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
if you run meth all the time you will likely not need injectors...
Reply
0

Trending Topics

Old Feb 18, 2007 | 06:07 PM
Share
  #8  
whitey4d's Avatar
whitey4d
Evolved Member
iTrader: (1)
 
Joined: Sep 2005
Posts: 751
Likes: 0
From: Harpers Ferry,WV
Originally Posted by SWOLN
660's if you are just running pump gas, but if later you run c16 or meth you'll need bigger. IMO 720's
Umm... Need you run Meth/Alky inj. or race fuel you actually need less injector not more. Especially so with the Injection kits.
Reply
0
Old Feb 18, 2007 | 06:11 PM
Share
  #9  
whitey4d's Avatar
whitey4d
Evolved Member
iTrader: (1)
 
Joined: Sep 2005
Posts: 751
Likes: 0
From: Harpers Ferry,WV
I would say either 660 thru 750 sould be fine with a flash. If your going to be running 91 oct then you should lean towards a slightly higher flowing set up. I think that 660 would do fine.
Reply
0
Old Feb 18, 2007 | 06:14 PM
Share
  #10  
EvoTech's Avatar
EvoTech
Evolved Member
iTrader: (25)
 
Joined: Feb 2004
Posts: 1,424
Likes: 1
From: Long Island
98% of injectors are made by about 3 manufactures. Other companies like Buchur just put their name on them.
Reply
0
Old Feb 18, 2007 | 06:18 PM
Share
  #11  
DS-03evo's Avatar
DS-03evo
Thread Starter
Evolved Member
iTrader: (21)
 
Joined: Nov 2006
Posts: 822
Likes: 0
From: Central PA
This will be on 93oct, no race gas. It is my daily driver.
Reply
0
Old Feb 18, 2007 | 06:32 PM
Share
  #12  
Ted B's Avatar
Ted B
EvoM Guru
20 Year Member
Photogenic
Photoriffic
Liked
iTrader: (6)
 
Joined: Aug 2004
Posts: 6,334
Likes: 63
From: Birmingham, AL
650s are fine for you.
Reply
0
Old Feb 19, 2007 | 01:39 PM
Share
  #13  
DS-03evo's Avatar
DS-03evo
Thread Starter
Evolved Member
iTrader: (21)
 
Joined: Nov 2006
Posts: 822
Likes: 0
From: Central PA
Originally Posted by EvoTech
98% of injectors are made by about 3 manufactures. Other companies like Buchur just put their name on them.
Do you know who makes the Buschur injectors?
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS: 20G Evo 9 6 blade turbo , PTE 680 injectors
EvoVIII03
For Sale/WTB - Engine / Drivetrain / Power
22
Feb 23, 2011 06:50 PM
Fs: HKS 264/272, 680 Injectors (Denso)
4G63 T
For Sale/WTB - Engine / Drivetrain / Power
6
Dec 4, 2010 12:36 PM
need to upgrade injectors for evo9-20g+cams?
erggy
General Engine Management / Tuning Forum
3
Oct 4, 2008 06:19 AM
20G-9 from buschur.
deadbeatrec
Evo Engine / Turbo / Drivetrain
361
Mar 6, 2006 02:46 PM
Injector with 20g-9 and alky
The442GTO
Evo Engine / Turbo / Drivetrain
12
Feb 19, 2006 05:58 PM
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
Does anybody make a direct bolt-on DBB 50 Trim for the Evo?




Advanced Search

All times are GMT -7. The time now is 02:44 PM.