daisaw1219

iTrader: (14)

a how to would be great. Are there a price savings vs sending it to shep or tre.

kickin wing

iTrader: (5)

I will take some pictures of my re-assembly tonight maybe write something up to help with dis-assembly/re-assembly of the case

vboy425

iTrader: (19)

please do

YoungEvolution

iTrader: (25)

+1

c_penson

how much did shep sell you the gear?, i need the same one for one of my trans.

kickin wing

iTrader: (5)

Well I actually contacted a few people.

Jacks
Shep
TRE


Jackstranssmission was the first to get back to me but had to get a price
Shep was the first to get me a price
TRE... (crickets)...

Price range from all 3 was from 150-200 I am not going to give you an exact price I will let them quote you on that.

PATRICK B.

iTrader: (5)

Subscribed nice thread going on here.

Was just having a discussion w/ Dave W. a local DSM guy that rebuilds a bunch of DSM trannies so i asked him about the Evo trans and he said it shouldn't be too diff.

I'll link him over to this thread but i wanted to subscribe incase a how-to was posted.

By the way to the OP when you say you found what was causing the "noises".........what kinda noises where you hearing?

FX11

iTrader: (10)

wow this is truly great! I will def rebuild my own when the time comes. And the pics of the disassemble/reassembly will help even more! Thanx =]

kickin wing

iTrader: (5)

I was hearing a clicking noise at low speed that was wheel speed driven not engine RPM driven. I was also getting a low speed howl. The howl is almost non-existent and the clicking is now gone.

I will post some pictures up from the FSM

R/TErnie

iTrader: (32)

I ended up ordering my parts from Dan Buschur. Mostly because they answered the phone every time I called and were able to get me prices literally minutes after I called. Dan was also nice enough to suggest some pieces that were missing from my list. A little bit of upsell was had, but only in good nature.

TRE answered and said they would get back to me with a price... one week later... crickets.
Shep wouldn't sell me the parts
I did not call JacksTransmissions. I don't do well with email only communication.

kickin wing

iTrader: (5)

Here are some of the exploded views and torque settings of some of the major components of the transmission

PATRICK B.

iTrader: (5)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^

RIGHT ON!

Thanks for that it's going up on the wall!

FX11

iTrader: (10)

I hear really good things from Bushur, i think i will probably start going that route

DDATuned

iTrader: (49)

In.

EvolNinja

iTrader: (22)

Wow, A How-To would be good. I hope I don't have to tackle mine anytime soon. In the process of changing my T-Belt. Anyway, Email me the manual too if you still have it