So i'm bilding a engine.

what can i see out of it.

2.0 ltr longrod
K1 rod's
Wiseco pistons
Gsc s2 cam's
Gsc beehive spring/ retainer kit
Fidanza Cam Gear's
Pte 1000cc's
Walbro 255
Fullframe Vband Hta3582R
Hks airfilter
3'" Japspeed S1
Aftermaket intercooler

If the turbo got the puff i like to be runnng 9k rpm

 

https://www.evolutionm.net/forums/ev...ega-merge.html

literally the very first thread

 

Yeah looked over that..

So to a admin.. Please feel free to remove this

 

Need an opinion on how much power to expect with current mods

25g kinugawa @ 26psi
1000cc injectors
Evo 9 bov
Injen piping and intake
2.5" intercooler
3" exhaust turboback
272 bc cams

Probably will vd tomorrow to get a baseline buy i know its not accurate

 

What will my seup make?

 

2003 evo 8
Stock block
Stock turbo
Helix downpipe and test pipe
stock catback with tanabe muffler welded on
Megan o2 housing
Ams lower intercooler pipe
Greddy upper intercooler pipe
Greddy vta bov
Amsoil intake
Kelford 272 cams
Walbro 255 fuel pump
3 port grimspeed boost controller
And a tune by evolution dynamics

(possibly adding fuel injectors amd anything else he recomends)

 

anyone for this setup? ^

 

2.0 Built Block
ARP Headstuds
GSC S2 Cams
PTE 880cc Injectors
Walbro 255lph
Skunk2 Intake Manifold
Blox Thermal Intake Gasket
S90 74mm Throttle Body
3" UICP
3.5" Intercooler
2.5" LICP
3" Intake and Filter w/maf
25G, TD06 Turbine, 11.5 Hotside, Turbo
o2 Dump Housing
3" Turbo Back w/ Muffler
Omni 4 Bar
EGR Delete
Grimspeed 3-port EBC
Spoolin-Up COP Kit
28-32 psi
98 octane pump/xylol mix

 

2003 evo 8
Stock block
Stock turbo
Helix downpipe and test pipe
stock catback with tanabe muffler welded on
Megan o2 housing
Ams lower intercooler pipe
Greddy upper intercooler pipe
Greddy vta bov
Amsoil intake
Kelford 272 cams
Walbro 255 fuel pump
3 port grimspeed boost controller
And a tune by evolution dynamics

(possibly adding fuel injectors, arp headstuds, and anything else he recomends)

 

750whp on c16

 

I think you would be looking at around 550-600hp on 98 octane, a little less if you have lower octane

 

Hey guys so I was wondering what kind of hp numbers I could expect wih my setup I'm getting.
-fp black JB
-ets fmic
- 1100cc injectors
-mix brands of downpipe and intercoller piping
- kelfords 272
-supertech dual spring and retainers
-Perrin silicone intake
-mbc
-speed density
-93 octane
What are some inputs?
I know the stock block is risky after 500 I want to be at around 450 maybe a little more with good amount of room to grow. Will this be an easy attempt for the setup I have?

 

I would think so.

 

steven 121 i am guessing 400-450 whp on e85. pump = 400. i am asuming u are on stock bottom end.

 

j woody , my guess is 310-330 whp