Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Loosing power. What's wrong?

Thread Tools
 
Search this Thread
 
Old Nov 25, 2010 | 05:02 PM
  #1  
Billy05MR's Avatar
Thread Starter
Newbie
 
Joined: Apr 2010
Posts: 18
Likes: 0
From: baltimore, MD
Loosing power. What's wrong?

I have an 05. It drives fine under normal cruising conditions but when i get into it it will builg boost up to 8 psi and then it will loose all power. it holds the 8 psi. And it builds the boost very quickly like normal. I dont think its a boost leak. could it be the MAF or a bad spark plug or coil pack? I have full exhaust, exhaust manifold, uicp, licp, intercooler, intake, and an aem truboost boost controller. Any ideas?
Reply
Old Nov 25, 2010 | 05:10 PM
  #2  
monkey_187's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jun 2008
Posts: 1,431
Likes: 0
From: Unknown
Are you tuned with your current mods? Have you done a boost leak test? I would check the basic s**t first.
Reply
Old Nov 25, 2010 | 05:28 PM
  #3  
evo unknown's Avatar
Evolved Member
iTrader: (25)
 
Joined: Sep 2007
Posts: 1,405
Likes: 1
From: Orange County, NY
+1..is the car tuned?
Reply
Old Nov 25, 2010 | 09:48 PM
  #4  
Billy05MR's Avatar
Thread Starter
Newbie
 
Joined: Apr 2010
Posts: 18
Likes: 0
From: baltimore, MD
No not tuned but ive been running the car with all the parts in for the past 3 months and nothing went wrong until now.
Reply
Old Nov 26, 2010 | 12:32 AM
  #5  
EVO(boss)'s Avatar
Evolved Member
iTrader: (1)
 
Joined: Dec 2008
Posts: 570
Likes: 2
From: KSA
boost leak or MAF
Reply
Old Nov 26, 2010 | 01:28 AM
  #6  
3dcalixpress's Avatar
Newbie
 
Joined: Aug 2010
Posts: 41
Likes: 0
From: so cal 760/951
maybe your solenoid went bad on the tru boost ...was it new or used ?
Reply
Old Nov 26, 2010 | 02:35 PM
  #7  
Billy05MR's Avatar
Thread Starter
Newbie
 
Joined: Apr 2010
Posts: 18
Likes: 0
From: baltimore, MD
It was brand new. If it was the MAF would it throw a CEL?
Reply
Old Nov 26, 2010 | 04:54 PM
  #8  
BOOSTIN24's Avatar
Newbie
 
Joined: Dec 2004
Posts: 55
Likes: 0
From: Seattle
I had a similar problem, for me it was my intake, but if its not that it could also be your wastegate if its still the stock one
Reply
Old Nov 26, 2010 | 05:15 PM
  #9  
4g63Moon's Avatar
Evolving Member
iTrader: (9)
 
Joined: Jun 2010
Posts: 358
Likes: 0
From: AZ
What kind of bov do you have? And did you check all the pipings for leaks?
Reply
Old Nov 26, 2010 | 08:43 PM
  #10  
Billy05MR's Avatar
Thread Starter
Newbie
 
Joined: Apr 2010
Posts: 18
Likes: 0
From: baltimore, MD
I'm running the factory recirc. valve. What would be wrong with the wastegate?
Reply
Old Nov 26, 2010 | 08:44 PM
  #11  
Billy05MR's Avatar
Thread Starter
Newbie
 
Joined: Apr 2010
Posts: 18
Likes: 0
From: baltimore, MD
And what was wrong with your intake?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Y_U_no_run_evo
Evo Engine / Turbo / Drivetrain
16
Dec 16, 2016 04:01 PM
zbents
Evo Engine / Turbo / Drivetrain
6
Jan 10, 2013 01:18 AM
aceinthesky2002
Evo General
7
Nov 22, 2007 05:43 PM
hiphopfeinds
Vendor Service / Parts / Tuning Review
4
Oct 14, 2007 09:32 PM
EVONation
Evo Engine / Turbo / Drivetrain
9
Feb 18, 2005 11:06 AM




All times are GMT -7. The time now is 06:26 PM.