Which plug should I use? Anything I'm missing?
Thread Starter
Newbie
Joined: Jun 2014
Posts: 14
Likes: 0
From: Beaver creek Ohio
Which plug should I use? Anything I'm missing?
Getting the ix back together, transmission and clutch replacement.
Going to get the evo tuned after put back together and break in.
Setup :
Fp Black
built shep trans
built tcase
bosch 1600 cc injectors
aero 340
bfmic
hard pipes
exhaust
intake
act monoloc
fpr with lines
works sts
Currently running the ikh24 one step colder plug when I was just bolt ons and wasn't sure if I should stay with them.
Also if anyone has any other parts I should look into that slipped my mind I would appreciate it.
Going to get the evo tuned after put back together and break in.
Setup :
Fp Black
built shep trans
built tcase
bosch 1600 cc injectors
aero 340
bfmic
hard pipes
exhaust
intake
act monoloc
fpr with lines
works sts
Currently running the ikh24 one step colder plug when I was just bolt ons and wasn't sure if I should stay with them.
Also if anyone has any other parts I should look into that slipped my mind I would appreciate it.
ask your tuner
also, NGK ILFR7H
there's no reason not to run the stock plugs unless you have good reason not to. thinking that one step colder plugs are needed "just because" is not good reason
also, NGK ILFR7H
there's no reason not to run the stock plugs unless you have good reason not to. thinking that one step colder plugs are needed "just because" is not good reason
Thread
Thread Starter
Forum
Replies
Last Post
Carloverx
Evo Engine / Turbo / Drivetrain
8
Nov 19, 2009 04:28 PM
iWant2play
Evo Engine / Turbo / Drivetrain
17
Mar 1, 2007 02:34 PM