Evo 9 / 80 series rebuild options
Thread Starter
Newbie
Joined: Apr 2020
Posts: 1
Likes: 0
From: Ireland
Evo 9 / 80 series rebuild options
Hey guys looking for some advise.
Currently running the above turbo with 0 issues and holding boost etc perfect .
Upon checking the impeller today I've found substantial play and by that I mean easily 5-10mm in the thrust direction and minimal radial play .
soooooo... I'm looking to catch this now rather that leave it explode .
Is there a off the shelf chra to suit or even better and upgraded ball bearing version ?
I'm surprised theres no issues showing itself with this play , theres no rubbing on the compressor housing or oil burning issues ( car uses 0 oil between services ) .
Thanks in advance people
Currently running the above turbo with 0 issues and holding boost etc perfect .
Upon checking the impeller today I've found substantial play and by that I mean easily 5-10mm in the thrust direction and minimal radial play .
soooooo... I'm looking to catch this now rather that leave it explode .
Is there a off the shelf chra to suit or even better and upgraded ball bearing version ?
I'm surprised theres no issues showing itself with this play , theres no rubbing on the compressor housing or oil burning issues ( car uses 0 oil between services ) .
Thanks in advance people
Thread
Thread Starter
Forum
Replies
Last Post
zbestevors
Evo Engine / Turbo / Drivetrain
3
Apr 28, 2016 10:39 PM
