Dropped the AC button down the center console through my open ashtray hole while installing my new gauges:-/ It's the one on the triple button hvac control panel on the 2003 lancer OZ... defrost - ac - recycle

I need the number for the ac button. Can't figure out what it's called to search for it. Tried knob/switch/control/etc.

thanks!

 

why not jsut remove the console and retrieve your lost button???

the console is very simple to remove

 

Do you have an VIII or IX?

 

I was debating it, but it fell inside the carpet and sounds like it fell deep, like through a hole in the shifter assembly. I almost had it, it was right on the edge of the carpet hole cutout, and then all I did was make it fall deeper. I don't want to take out the assembly just to find I won't be able to get to it without a crapload of effort. I'm assuming it's just a few $$...

 

lol try man try lol wheres the fun in that?
lol but the shifter is a sealed unit so it would not fall through.. my advice is go at it from an angle and use your wife/girl hand.. smalled hands reach deeper and don't create more space for it to go further lol

 

No small girl hands available, my girlfriend has man hands. she's a butcher:-p

heh, any idea what the button is called? It's not called a button, knob, or switch...and I've gone through CAPS a few times trying to figure out what to search for...

 

Hi guys greetings from Sweden

I need a part nr for the ac condenser for my Evo 8 -03 (us-spec).

I have found alot of differant number but i dont know wich it is?

Sorry for my bad english.

/chris

 

whats the part number for the front core support frame? yes i mean the whole front portion thats welded onto the main support that attaches to the headlights, fmic, front bumper support.

and price if anyone has an idea.

thanks!

borrowed this pix from here:

https://www.evolutionm.net/forums/sh...hlight=fenders



the front frame is what im looking for

 

Here is a link -- its in stock
http://www.mitsubishiparts.net/cart/?id=571&pn=5215A103

 

LINK

http://www.mitsubishiparts.net/cart/?id=571&pn=7812a049

 

This should be it right here. You dont have to use the "search" feature in CAPS...you can actually look up the part.

http://www.mitsubishiparts.net/cart/?id=571&pn=MR500925

 

Hi Guys, as most of you know the MR has an oil drain plug with a sensor and attached wire that measures the oil temp. My oil temp gauge is going crazy back and fourth and I wanted to change the plug to see if the sensor is gone bad. I went to the dealer and they have never heard of a oil drain bolt with a plug. I looked along with the part guy at all the diagrams and all the dealer has is regular bolt. The guy even looked it up with my VIN number. So the question is, does someone know the part number for the MR oil pan drain plug? Is this something that the dealer puts as an aftermarket item? Thanks for your help!

 

Drain plug that measures oil pressure? How does that work?

 

It's oil temp, not pressure. I've heard that you can't get it by itself, you have to order the whole gauge set to get it. You might try ebay.

 

Sounds like that won't fix his problem then.