All Part Number Request Go Here
Originally Posted by EVOKing8
Anyone know the part number for the metal clips in the radio reloctation kit (to move radio down)? and does anyone know if there is an open cubby i can put up top?? and if so that part number?
MZ598263EX
Evolved Member
iTrader: (6)
Joined: Oct 2004
Posts: 1,666
Likes: 0
From: From Ohio, now in N. Virginia
I need the PN's for gauge cluster light bulbs...all 4... here's a picture: http://bolsen.homeip.net/evolights.htm
I believe 3 of the bulbs are the same, and the other is smaller than the 3.
I have an 03 evo if there's a difference.
thanks.
I believe 3 of the bulbs are the same, and the other is smaller than the 3.
I have an 03 evo if there's a difference.
thanks.
Last edited by mdosu; Mar 28, 2006 at 05:36 AM.
Originally Posted by eling99
i believe mn143555
Can someone confirm if the MN156396 part number gets you all 3 hoses that connect at the 'T':
One hose runs from the Turbo to the T (has restrictor), one runs from the wastegate actuator to the T, and one runs from the boost solenoid to the T (has restrictor).
I need all 3 of those hoses for a 2006 Evo 9, not sure if the 9 has yet another part#.
MANY MANY Thanks!
Originally Posted by z06fun
After spending some time searching through this thread, I believe that part# is for the early US Evo's, maybe the '03's only. Looks like there is a newer part MN156396 for later Evo's.
Can someone confirm if the MN156396 part number gets you all 3 hoses that connect at the 'T':
One hose runs from the Turbo to the T (has restrictor), one runs from the wastegate actuator to the T, and one runs from the boost solenoid to the T (has restrictor).
I need all 3 of those hoses for a 2006 Evo 9, not sure if the 9 has yet another part#.
MANY MANY Thanks!
Can someone confirm if the MN156396 part number gets you all 3 hoses that connect at the 'T':
One hose runs from the Turbo to the T (has restrictor), one runs from the wastegate actuator to the T, and one runs from the boost solenoid to the T (has restrictor).
I need all 3 of those hoses for a 2006 Evo 9, not sure if the 9 has yet another part#.
MANY MANY Thanks!
yea i was gonna give you that number too...
here it is: https://www.evolutionm.net/forums/sh...&page=37&pp=15
post #541
but yeah...the part number will get you the entire hose assembly. i also use the mn143555, and had no problems
Thank you so much. My local mitsu dealership has taken over a week and still does not have it in, would not give me the part #, and still cannot tell me when they expect to get it in. Any suggestions? (re: emission solenoid)
Last edited by PTevo; Mar 29, 2006 at 08:38 PM.
Originally Posted by eling99
yea i was gonna give you that number too...
here it is: https://www.evolutionm.net/forums/sh...&page=37&pp=15
post #541
but yeah...the part number will get you the entire hose assembly. i also use the mn143555, and had no problems
here it is: https://www.evolutionm.net/forums/sh...&page=37&pp=15
post #541
but yeah...the part number will get you the entire hose assembly. i also use the mn143555, and had no problems
Originally Posted by justchil
I need the part# for the wheel well plastic on the passenger side.
I found this but it's for the driver side:
2003 lancer evo 8 inner fender wheel well plastic driver side front
MR954175 - Shield Kit, Splash, Front LH
I found this but it's for the driver side:
2003 lancer evo 8 inner fender wheel well plastic driver side front
MR954175 - Shield Kit, Splash, Front LH
