All Part Number Request Go Here
#3874
Newbie
iTrader: (3)
Join Date: Mar 2012
Location: Grand Junction, CO
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody have the part numbers or a list of part numbers for every single bolt and nut on the engine and transmission as well as the acd unit? I somehow lost a majority of hardware since I pulled my engine out.
#3878
HHHHHHHHHHHEEEEEEELLLLLLLPPPPPPPPPPPP
Just bought an evo 9 mr.
1.I need to replace the c.f. trim around the doors.
2.I need the rubber lip for the front bumber.
3.on the rear drivers side wheel well there is a plastic piece that connects the back bumber to the car. mine is missing making the bumber wobble during driving.
please any help would be awesome.
Just bought an evo 9 mr.
1.I need to replace the c.f. trim around the doors.
2.I need the rubber lip for the front bumber.
3.on the rear drivers side wheel well there is a plastic piece that connects the back bumber to the car. mine is missing making the bumber wobble during driving.
please any help would be awesome.
#3879
Evolved Member
iTrader: (15)
Putting a new motor/tranny (4g69 from 06 ralliart) into an '03 OZ Rally (auto). Ran into this little white box (looks like a small computer) tucked behind the dash on the passenger side - anyone know what it is? Part number on it is # MR563487 but I can't find any information online about it??
My new harness (from an 06 ralliart / manual) does not have a plug for this...wondering what it is and if I can just ignore it, or if I have to splice into the harness and use part of my old harness
(I'm thinking maybe it's cruise control which the ralliart my new harness is from did not have??)
My new harness (from an 06 ralliart / manual) does not have a plug for this...wondering what it is and if I can just ignore it, or if I have to splice into the harness and use part of my old harness
(I'm thinking maybe it's cruise control which the ralliart my new harness is from did not have??)
Last edited by doncarbone; Feb 26, 2013 at 06:10 PM.
#3880
Newbie
iTrader: (2)
Join Date: Feb 2009
Location: Howell, MI
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody have any idea what the part numbers are for the bolts that hold on an Evo 8 front bumper? STM seems to have all of the clips for the bumper, but they do not have the bolts listed.
I know there are two up top that bolt in to the radiator support, and two in the top corners of the lower center mesh insert.
The previous owner zip tied everything so I am trying to get it back to normal!
I know there are two up top that bolt in to the radiator support, and two in the top corners of the lower center mesh insert.
The previous owner zip tied everything so I am trying to get it back to normal!
#3881
EvoM Community Team
iTrader: (134)
Does anybody have any idea what the part numbers are for the bolts that hold on an Evo 8 front bumper? STM seems to have all of the clips for the bumper, but they do not have the bolts listed.
I know there are two up top that bolt in to the radiator support, and two in the top corners of the lower center mesh insert.
The previous owner zip tied everything so I am trying to get it back to normal!
I know there are two up top that bolt in to the radiator support, and two in the top corners of the lower center mesh insert.
The previous owner zip tied everything so I am trying to get it back to normal!
MS452393 x2
MR393386 x2
2. What lip? The lip itself? The undertray?
3. MR954177
#3883