Installed APS BOV
Installed APS BOV
Just wanted to share with everyone my 1st impression with the install of the APS BOV. 1st and foremost, I want to thank Ben at RallySport Direct for his great service, follow-up and prices.
www.rallysportdirect.com
This was a straight forward install, tools used were 10mm socket and a pair of pliers. I did not have to make any sort of adj. on the BOV, installed and went for a drive. No idle problems, no surging at low or high RPM's. The external noise is not annoying in anyway.
I will follow-up with a long term impression regarding this unit.
This was a straight forward install, tools used were 10mm socket and a pair of pliers. I did not have to make any sort of adj. on the BOV, installed and went for a drive. No idle problems, no surging at low or high RPM's. The external noise is not annoying in anyway.
I will follow-up with a long term impression regarding this unit.
there is 2 opening on aps bov right?>
second one is vented to atmosphere....how often do we let our air to outside?(how often do we use second valve?)
all the time? if it is ... dont we have problem by letting out metered air?
second one is vented to atmosphere....how often do we let our air to outside?(how often do we use second valve?)
all the time? if it is ... dont we have problem by letting out metered air?
Originally Posted by yesevo
there is 2 opening on aps bov right?>
second one is vented to atmosphere....how often do we let our air to outside?(how often do we use second valve?)
all the time? if it is ... dont we have problem by letting out metered air?
second one is vented to atmosphere....how often do we let our air to outside?(how often do we use second valve?)
all the time? if it is ... dont we have problem by letting out metered air?

Let me know if you have any questions about this valve thanks.
Ben
Trending Topics
http://www.rallysportdirect.com/shop.../APS%20BOV.avi
Here ya go.
We will have a new clip of one with a open intake. The open intake really makes it sound mean.
Ben
Here ya go.
We will have a new clip of one with a open intake. The open intake really makes it sound mean. Ben
Originally Posted by RallySport Direct
Yes it is considered a dual stage. It is not 50/50 like most dual vent valves This one actually adjust itself depending on how much boost you are running at the time. Like if you are half throttle and let off. It will let most back into the intake track for driveability but if you are WOT at full boost it will let more VTA. It is really a great design. This is the only valve we run on our shop cars. 
Let me know if you have any questions about this valve thanks.

Let me know if you have any questions about this valve thanks.
Also, can you provide a link to the valve on your site? I couldn't find the BOV section.
Originally Posted by Warrtalon
Does it uninstall just as easy as it installs? In other words, if I was concerned about warranty issues, could I easily switch back to the stocker with no trouble and no side effects?
Also, can you provide a link to the valve on your site? I couldn't find the BOV section.
Also, can you provide a link to the valve on your site? I couldn't find the BOV section.
Uninstalls in 5mins. Thats what I do before I take my car to the dealer
Originally Posted by stormhalter
Is there a sound clip for the HKS SSQ BOV? Oh and what's the link to the APS BOV sound clip with the ope intake?
Thanks.
Thanks.

We actually have just sold out of the valves. We sell them for 210 a piece and have more on the way.
Ben
Thread
Thread Starter
Forum
Replies
Last Post
Outie11
Outlander Sport
19
Sep 30, 2015 03:27 AM
BriK
Vendor Service / Parts / Tuning Review
28
Sep 2, 2010 10:28 AM
S6devil
The Loft / EvoM Car Talk Corner
11
Apr 21, 2009 08:36 AM
xLaNcErEvOx
Gruppe-S Engineering - California
143
Oct 3, 2006 08:30 PM





