I was running 14 to 15 psi I was told it would prolly be the boost selonoid to hook up a bc and it bring up to stock boost. My only miss are a full turbo back and air filter

 

One line is teed into the bov to intake manifold and the other is goin straight to wastegate. I brought the boost up to 17 and it just feels like crap it doesn't pull or anything

 

lets try this from the start.

did you have the intake and exaust on and it working correctly? (19 ish psi boost)

if the mbc is installed correctly now if you turn it up will it boost over 15 psi?

 

did you cap off the other nipples on the turbo and on the intake?

 

Before I decided to install the boost controller I noticed that there was a air bleeder installed and I coyldnt undrstand y I was hitting 25 psi but there was lag the air bleeder was running to wasgate I removed it and I was only hitting 14 to 15 psi but performance and spool was a lot better just not ebough boost so j went and got the hallman it boosts 20 psi but I think there is a leak so I'm gonna take everything apart make sure everything is tight and try it again