Whats up everyone,

Im installing my JDMs, but im not sure what to do with the two bolts on furthest from the middle, that have that rubber cover over them. It seems like i have to just force those out, but it seems like it would wear down the sides of the frame portion that its attached to if i do that.

Can anyone give me a hand?

 

Here's how easy it is - we changed mine at night in a parking lot with a screwdriver...

1. Open the trunk

2. Unscrew the bolts

3. Ease the lights out

4. Unplug the harness.

5. Reverse the sequence and voila, there you go.

 

Hey just curious where to order a set of the JDM tail lights and what the est. price of it.

thanks

 

yup tell me too...i want to get a set..those altezza's are fugly! nah j/k they are alright i guess.

 

i trying to get a pair right now....damn tokyo time!!

 

japanparts.com never respond back to me

 

machevo.com has some, bit spending on there i've seen them alot cheaper on ebay

 

the little grasping thingy on the far side is stuck on the stock lights.. i can not get it off, nor i can i install them without it... anybody know the best way to get it off?

 

haha. wow, someone really dug this one up. take a pic of it, then itll be easier for us to know what you're talking about

 

ok just so anybody else who installs these tailights knows, the outter pop ins will stick onto the light housing when your remove it... the center one should come right out and remain in the bumper. leaving the rubber condom on the plastic pop piece so the edges are not damaged.. from there i grabbed it around the sides with the grabber part of a wire stripper and yanked it off.. it takes a little bit of force, so i suggest you get everything else completed first. Your lights wont go on without these so dont even think about it