AlchEm1st's Evo IV Coupe conversion project
Here it is!
https://www.evolutionm.net/forums/ev...ml#post9641495
Thanks for the good info! lol and nope not going rhd..
https://www.evolutionm.net/forums/ev...ml#post9641495
Thanks for the good info! lol and nope not going rhd..
Well, it's been a long time since I've updated this thread, so here's some updates!
Merrill Performance fender braces

Ralliart reservoir socks (Brake master cylinder and power steering reservoirs)

Stock bore Evo 8 block!

Minty fresh 4G64 crank!

Rear Brembo bits

Also got an Evo 5 ECU and a Tactrix Openport 2.0 cable for tuning! With the two
of those I can do my own tuning and also enable the factory launch control and antil-lag system!
Also, got a big update coming soon! Have a HUGE shipment coming from japperformanceparts.co.uk!
Merrill Performance fender braces

Ralliart reservoir socks (Brake master cylinder and power steering reservoirs)

Stock bore Evo 8 block!

Minty fresh 4G64 crank!

Rear Brembo bits

Also got an Evo 5 ECU and a Tactrix Openport 2.0 cable for tuning! With the two
of those I can do my own tuning and also enable the factory launch control and antil-lag system!

Also, got a big update coming soon! Have a HUGE shipment coming from japperformanceparts.co.uk!
Last edited by Alchem1st; Dec 20, 2011 at 04:51 PM.
I got it from Japperformanceparts.co.uk. Good luck if you want one though, it's taken months to get
this one and they aren't getting anymore now. If you want a 5 or 6 clone though you use the rear
floor (well, the whole rear end actually) from an 8 or 9 as they're the same as the 5/6. As far as cost,
it's a whole lot. Shipping alone was around $700 and the floor wasn't cheap either. Mirage conversions
definitely aren't for the faint of heart.
this one and they aren't getting anymore now. If you want a 5 or 6 clone though you use the rear
floor (well, the whole rear end actually) from an 8 or 9 as they're the same as the 5/6. As far as cost,
it's a whole lot. Shipping alone was around $700 and the floor wasn't cheap either. Mirage conversions
definitely aren't for the faint of heart.
Last edited by Alchem1st; Dec 24, 2011 at 04:09 PM.
BIG UPDATE TIME!
Got away with only a $35 paperwork charge woo!
Evo 4 RS floorpan

Evo 4 RS center console with intercooler sprayer switch

Evo 4 RS fuel filler pipe

Stay tuned! Gonna drill the hole for my turbo timer in the console and get it installed tonight!
Probably finish unwrapping the floor also so I can see what hardware was included. AWD FTW!
I'M SO STOKED!
Got away with only a $35 paperwork charge woo!
Evo 4 RS floorpan

Evo 4 RS center console with intercooler sprayer switch

Evo 4 RS fuel filler pipe

Stay tuned! Gonna drill the hole for my turbo timer in the console and get it installed tonight!
Probably finish unwrapping the floor also so I can see what hardware was included. AWD FTW!
I'M SO STOKED!
Few more pics, got the console in and unwrapped the floorpan! (Interior is not near as dirty as the pic makes it look, I think there was dust on the lense and there's no stain on the seat either
)


)

Wow haha my thread on Mirageforums has been exploding I'm surprised I got no comments here as I'll be doing the AWD conversion now! There's only two other AWD 5G coupes out there that we know of. Maybe ya'll are just speechless?
This was me when we loaded it onto the truck:
This was me when we loaded it onto the truck:
Last edited by Alchem1st; Jan 7, 2012 at 09:49 PM.
Saj over at Japperformanceparts.co.uk found it for me! Good luck finding one for yourself! He's not carrying them anymore, mine is the last one he said he's export ing to the US. If you want a 5 or 6 clone though you can use the floor from an 8 or 9, (since the 5/6 are widebody) the 4 floor is the only one that's special.
8/9 floors are easier to come buy since you just gotta find one that's been totalled. Thanks!
8/9 floors are easier to come buy since you just gotta find one that's been totalled. Thanks!







