Anyone know how to update nav firmware?
Newbie
Joined: Sep 2011
Posts: 1
Likes: 0
From: Canada
Instructions for non-nav system WITH USB port:
If all of this didn't work, let me know.
PS: You don't need this update if you don't have a USB port. This update is only for compatibility with iOS 4.0 or higher through the USB port!
- DO NOT PRESS BRAKES
- Turn audio system "OFF"
- Press the following in order: CH1 preset Button, |<< (seek down) button, >>| (seek up) button, and then CH4 preset button.
- "HFM DIAG" should be displayed on the system, if not repeat previous steps.
- turn the volume to 0
- press the "CH4" preset again to toggle through the diagnostic functions
- then look for any PN lower than 8785A035 or S/W lower than 0900000
- Once you see "HFM OK" displayed, press CH3 preset button to toggle back until "HFM DIAG"
- Once you see "HFM DIAG" again press "PAGE" button to enter update mode.
- To enter the update security code, press CH1, CH2, Ch3, Ch4 in that order
- and the update should start updating.
- once that's done press "PAGE" button to return to "HFM DIAG"
- turn off the ignition and remove the USB flash drive
- test to see if it worked.
If all of this didn't work, let me know.
PS: You don't need this update if you don't have a USB port. This update is only for compatibility with iOS 4.0 or higher through the USB port!
6. press the "CH4" preset again to toggle through the diagnostic functions
7. then look for any PN lower than 8785A035 or S/W lower than 0900000
8. Once you see "HFM OK" displayed, press CH3 preset button to toggle back until "HFM DIAG"
What do I do when i find a PN lower than 8785A035 or S/W lower than 0900000?
Thanks in advance.
Thread Starter
Newbie
Joined: Oct 2009
Posts: 89
Likes: 0
From: San Diego
Hey Thanks for this, I'd like to try it soon. However I'm confused by the following steps:
6. press the "CH4" preset again to toggle through the diagnostic functions
7. then look for any PN lower than 8785A035 or S/W lower than 0900000
8. Once you see "HFM OK" displayed, press CH3 preset button to toggle back until "HFM DIAG"
What do I do when i find a PN lower than 8785A035 or S/W lower than 0900000?
Thanks in advance.
6. press the "CH4" preset again to toggle through the diagnostic functions
7. then look for any PN lower than 8785A035 or S/W lower than 0900000
8. Once you see "HFM OK" displayed, press CH3 preset button to toggle back until "HFM DIAG"
What do I do when i find a PN lower than 8785A035 or S/W lower than 0900000?
Thanks in advance.
Thread Starter
Newbie
Joined: Oct 2009
Posts: 89
Likes: 0
From: San Diego
Thread Starter
Newbie
Joined: Oct 2009
Posts: 89
Likes: 0
From: San Diego
Newbie
Joined: Sep 2011
Posts: 4
Likes: 0
From: Israel
sorry being annoying ...
last time I hope I explain the process maybe I'm wrong somewhere
first - the car is Lancer Limited 2011 with Rockfor Fosgate sound system and with LINK SYSTEM withe BT
Steps :
1. Format 1 GB USB To FAT32 Quick Format ( note : I also try 2GB and even 8 GB )
2. Download the file from the link above
3. Extract to local HDD
4. Copy the file update.package to The USB
5. I Have Without NAV .
6. Insert the USB to the port
7. Start the engine ( without brakes )
8. turn Off the Sound System
9. HFM DIAG - >
10. CH4 ->->
11. CH3 Back to HFM DIAG
12. PRESS "PAGE"
13. Error Massage "No file"
More Details :
BDW : I try to format the usb also as NTFS , FAT , exFAT , FAT32 in Windows XP ( because I have Windows 7 ) .
My Fuse system Is 80000 Version
I'm despered ,
If anyone have an Ides I'll be happy to listen
Regards
Thread Starter
Newbie
Joined: Oct 2009
Posts: 89
Likes: 0
From: San Diego
sorry being annoying ...
last time I hope I explain the process maybe I'm wrong somewhere
first - the car is Lancer Limited 2011 with Rockfor Fosgate sound system and with LINK SYSTEM withe BT
Steps :
1. Format 1 GB USB To FAT32 Quick Format ( note : I also try 2GB and even 8 GB )
2. Download the file from the link above
3. Extract to local HDD
4. Copy the file update.package to The USB
5. I Have Without NAV .
6. Insert the USB to the port
7. Start the engine ( without brakes )
8. turn Off the Sound System
9. HFM DIAG - >
10. CH4 ->->
11. CH3 Back to HFM DIAG
12. PRESS "PAGE"
13. Error Massage "No file"
More Details :
BDW : I try to format the usb also as NTFS , FAT , exFAT , FAT32 in Windows XP ( because I have Windows 7 ) .
My Fuse system Is 80000 Version
I'm despered ,
If anyone have an Ides I'll be happy to listen
Regards
last time I hope I explain the process maybe I'm wrong somewhere
first - the car is Lancer Limited 2011 with Rockfor Fosgate sound system and with LINK SYSTEM withe BT
Steps :
1. Format 1 GB USB To FAT32 Quick Format ( note : I also try 2GB and even 8 GB )
2. Download the file from the link above
3. Extract to local HDD
4. Copy the file update.package to The USB
5. I Have Without NAV .
6. Insert the USB to the port
7. Start the engine ( without brakes )
8. turn Off the Sound System
9. HFM DIAG - >
10. CH4 ->->
11. CH3 Back to HFM DIAG
12. PRESS "PAGE"
13. Error Massage "No file"
More Details :
BDW : I try to format the usb also as NTFS , FAT , exFAT , FAT32 in Windows XP ( because I have Windows 7 ) .
My Fuse system Is 80000 Version
I'm despered ,
If anyone have an Ides I'll be happy to listen
Regards
I just installed a '08 nav in my non nav '11 X. Install went fine, but I can't use my Bluetooth or fuse system. I tried the USB update thing mentioned above, but when I hold set and navi, there is no option for hands free. Is there another way to update the software to enable Bluetooth and fuse, or am I out of luck because of the '08 nav?