Will this work on a 2014 MR?

 

There's a critical setting that makes TC-SST non-operational if being set incorrectly.
And there a good number of anxious clickers pressing "Yes" when DiagBox asks "Do you want to set all settings to their default values?". I already put big red warnings on my original thread on mitsubishiforums.com yet it still happens.

 

Most likely. Only 2014 Outlander isn't supported yet.
Though I haven't tried so I cannot confirm for now.

 

I just wanna publicly thank you Vadimus. Your help here is not unappreciated. I'd like to send you some beer money after I get this working. The TPMS haters in my area will thank you big time when I disable all their sensors for them free of charge. I'm glad someone let me borrow the cable to do this, and I definitely can't do it without your help!

 

Wow thanks!

Helping fellow drivers is really great feeling

 

Vadimus shoot me a PM with your Paypal address. I'd like to shoot you a little something extra for all your effort. Is there any support just yet for a 2013 GSR SS ?

 

Fastrax04 two updates recently came out for MUT-III, some data from its DB is being used for ETACS Decoder. Hopefully we'll have it converted and put into our software by end of this week.

 

Where is the best place to download the software? Thanks!

 

Donation sent your way!

 

Any updates?

 

Sorry for delay, almost there

Expect updated version really soon.

 

For those who tried this, did you guys used Diagbox for this without problems? I got my Lexia for 2011 GSR and tried it with decoder can't change any settings when I write to ETACS. I also get ASC System Service Required everytime I write to ETACS (got me very scared!) but would not show again after restart. I already asked Vadimus on the different forum about this and I really appreciate it.

I'm sorry if this is noob questions but I also noticed that some default settings that is kind of strange. Can you guys chime in.

61 ABS - not present
65 AWD/AWC - not present

should this be present for evos?

Thanks a lot.

 

ABS should be not present as you have ASC instead, it is either one or another.

Will check AWD/AWC setting tomorrow.

 

Thanks for the info Vadimus. Appreciate it. I'm trying to install diagbox now while waiting for the decoder fix but still scared of using it cause I might mess up something. I'll keep you posted

 

Would anyone willing to lend me one with a percentage back when I'm done? I just really want to make my fog lights independent of low beams...