Yet another thread about Turboing a 03 lancer.
Thread Starter
Evolved Member
iTrader: (14)
Joined: Oct 2006
Posts: 3,714
Likes: 2
From: West Coast WA
ok so maybe a dumb question about the push/pull fan do you want to wire it up to pull air through or push it? I would think push it through as number one it will be easier for the fan to push air the same direction as its coming while driving and also be pushing cooler air coming from the front then the heated air coming from engine bay. Maybe I just answered my own question but I wanted to confirm or not.
Last edited by 03lances; May 14, 2009 at 07:45 PM.
Thread Starter
Evolved Member
iTrader: (14)
Joined: Oct 2006
Posts: 3,714
Likes: 2
From: West Coast WA
Love you car thunderOZ lol. I checked out your build thread looks like you have the same taillights and same mirrors as me not to mention the same sick paint, what are you running for psi right now? and what are your power numbers?
Last edited by 03lances; May 14, 2009 at 10:41 PM.
Thread Starter
Evolved Member
iTrader: (14)
Joined: Oct 2006
Posts: 3,714
Likes: 2
From: West Coast WA
Ok so I have read that you can use a stock or aftermarket evo downpipe that just needs lengthen by a foot. Now would it make more sense if I am getting another exhaust setup to leave the downpipe as is and bring the exhaust to it?
I'm running a 2.5" with high flow cat, 2 resonators and a straight through Magnaflow muffler. It's very quiet, but flows more than enough for my setup. I'll be upgrading to a full 3" after my new engine goes in.
magnaflow lik ei have will get you what you want... race series muffler, 3inch.. u will get deep lower toned exhaust. might want to look into 1 or 2 resonators for it.. mine got to the point that it annoyed me cuz its a lower pitched sound. i have 1 glasspack on it now. but no cats and no resonators it will be loud, and deep tone..
I am curious about this too as I will be upgrading the exhaust at some point too


