buying a used/new mustang??

 

omg....NO.....building KITT, 1983 Trans am

 

ok.
i was thinking of the new Knight Rider's mustang

 

New KITT sucks...

 

ok so i know the last time i was on was in august and mentioned i wanted to do this swap well nothing has changed except that i got in trouble with the law lol nothing big and good news the army is paying my gi bill finally. ive got 3250 to invest in this project right now and am all set to get started i called around today to start sourcing parts but no luck ill just have to be patient if anyone is in the north carolina winston salem area and wants to help me find parts feel free to pm me the goal i want to do is get the 4g64 block mate the 4g63 head to it and turbo it hopefully all at once im hoping to be installing all this in the summer when i get out of school havent had the time to read all the posts left since august but i did skim over the info on the bit about fitting a different tranny will read over it to see if the questions were answered if not ill message again sorry bout being so wordy wish me luck and ill keep everyone updated on the progress

 

Im in NC up near raleigh and dream of doing something similar , I was going to start with the 4g64, get it running with no cel's ect. then swap in a dohc head from a hyundai (it is the same casting as the evo8 except you will be getting it cheaper because its off a no-name car) if you read on the galant forums this has been done ... only thing though make sure your looking at the right 2.4 4g64 because the 95-99 eclipse spyder 2.4 is different. you want the 2.4 4g64 out of the 01-03 galant or the 00-05 2.4 out of the eclipse. or the 2.4 out of the outlander but either way your really going to want to get everything together the wiring, the ecu, the engine, ect... if you have a source for the ecu and wiring you could get a motor from japan direct up here near raleigh they have pretty good prices... I may consider coming down and turning wrenches with you for a day for a fun learning expience... I have done a zc swap in a crx before and a few other motor/tranny swaps , i even converted my 97 gsx from an automatic to a manual(got it to run a 13.7 in the quarter was a sick car)... Give me a call sometime my name is gabriel c 919-247-3881 or h 919-341-8485

 

I"m only about 3 hours away. I wouldn't mind helping out.

 

Does the 2000 Galant not work?

 

thanks gabriel and juan as soon as this amazing holiday of new years is over im gonna start seriously busting nuts on this project like i said though i prob. won't start to put it in til this summer but if you wanna come down thats no problem im only 2 hours away from raleigh i talked to my uncle at christmas and he is going to be looking into junyards he deals with for his shop if you have the time feel free and call around to any junyards near you and see what they have and how much ill pm you my number so you can call if you find anything

 

OP I need you, shoot me a PM please. Thanks.

 

Would it be easier to swap bellhousing if the G94 and G64 using a F4Mxx tranny?

 

can you put a 4g63 head on this motor and if not, what other block is possible?

 

Japordie.....READ THE THREAD

 

its like 30 somthing pages long!

 

my friend it's on the very FIRST page, plus there is even a how to on the 7th page.