when i start the car it runs fine for like 2 or 3min(i can drive it but for a short while) but if i let it sit there for too long or put the foot one the brake and releas the E-Brake or try to drive it..the RPS jump to and idles up and down between 1000 and 1500 and then tried to die out and i get a CEL. But if i turn the car of for like 5sec and start it again it idles fine again with the CEL but later does the high idle...Can someone help me or now what the Prop is thanks...

 

What's the CEL code?

 

i dunno dont have a code reader and cant drive it a auto store

 

nothing really to be said w/out the code.
When you find it, it might be in your best interest to call RRM and see what they think.

 

here is the code.... P1241

 

Torque limit exceeded

Call RRM and let them know. They should help you take care of the problem. This should be fixable through a proper tune.

Edit: That is a nice code to be throwing!!

 

yeah i did and he has to wait till the place opens and talk to them.. in FL so Cali is 3hrs behind me... im just hopin it not a sensor in side the motor...
P.S. not if your car is not running

 

Well, this is what the evo x guys have concluded from this code but this is what it would read "P1241 Sensor Power Supply Low Input". Here's a link to the evo x discussion...
P1241

 

i seen that and just posted and didnt see a fix...

 

update???

 

oh yeah sorry...i didnt have a good connection for my Air-Fuel wire to the Piggy back when i soldered the wires....