For the daily's it's usually between amsoil and off-shelf Prestone, it has a surprisingly high boil and good feel for non-abused systems. I think I was one of the first ones in here reviewing RF650 improvements over SRF. Awesome stuff.

 

ots stuff from autozone ftw for my dailies haha

 

I'm the ENDLESS distributor in New Zealand - it really is that good.
Very easy to swap guys over from Motul/AP RBF660, the pedal feel is much better.
Essentially if you have brake problems with ENDLESS RF650, it aint the brake fluid.

Yup Brembo HTC64 is very good also

 

Yeah. I straight up melted ST43's off my car at Laguna Seca. Never lost the pedal.

 

who's the best flex fuel tuner on the east coast? i'd love to go to english racing but it's just so far out

 

Define east coast cause you'z in the middle of the country lol. Chicago is likely your best bet distance wise. AMS and several others.

 

I'm in Brooklyn these days car will follow later this year, i expect

 

Ah. So then I'd likely ask about the PA area, ExtremePSI and the like. Or skip down to STM/Emery.

 

ugh I forgot his handle. I think its @white_turbo , you can check with him where the NY Metro evos go for tuning

 

Actual flex or E85?

 

looking for actual flex, with something like this:

https://www.evodynamics.com/products...-flex-fuel-kit

 

Okay. I was going to offer to help tune it but I haven't worked with the FreeFuel rom on the 9. Only 8 and Tephra 10.

 

hmm can't be too different can it? 8 doesn't have mivec but 10 has 2?

after my most recent experiences i really, REALLY do not trust some of the more popular shops to actually give a **** about the customer cars they work on

 

separate note, for the guys running harnesses on roll bars, did you guys just weld a loop on for the harness to pass through?

i was looking at this solution (https://rennscot.com/products/rspro-...31783378190474) which i think is intriguing - easy to install/remove, quick and easy solution. not sure if people will scoff at a locking collar to hold the harness in place for side-to-side motion, but some don't use anything at all?

 

I lose sleep over this + $ and hours of rework. their mechanics got evo project cars that could use someone's evo parts too lol