Its way too long to post on evom. I would have made at least 5 post to fit it all


So I changed my tranny, tcase and rear diff oil and drove around for 2 miles all good. Park the car.

A few days pass, thought about driving the car today, but just peeked under before hand and there is a puddle.

I must have forgot to tighten something or lost a washer. It looks to be t-case, but im not climbing under my car on hot blacktop to find out.

So thats about it, not very interesting

 

one of the crush washers could have needed replacing. I had a small leak last time I replaced my transfer-case fluid.

 

fixing my 02 sensor sat and throwing on a jm fab 02 housing while im at it. maybe an intake after that. then saving for 60k service and a pistol. nothing exciting

 

^ that sucks... but at least you caught it before you drove the car too much and destroyed the TC.

I got my Deka battery yesterday and I'm now trying to figure out the best way to install it. its shorter and wider than my PC680, so the buschur battery tray I have doesn't work. I'm back to using the stock tray, but I need to figure out a solution for clamping teh battery down...

 

It was a joke guys. I dobt want to let it go for too long.

 

they didn't look like crush washers, just a standard flat washer if I remember right, but whatever it is Im sure I can figure it out

Its just too hot to be out all day working and then climb under my car after work to spill oil all over myself. I wait till it cools down to low 90s

 

I got bungess, and zip ties in the trunk
wait

 

this should get your blood flowing...

http://www.caranddriver.com/features...ourses-feature

 

^^^^You ****ing bastard

I got bad news on my kitchen roof last week. I need more than a ****ing roof

Did you watch Indy at the glen this weekend

 

Let me know how that goes. I was thinking of picking up one of those batteries and using the stock battery tray or building my own.

I wish I had taken the battery from my miata before i sold it.

 

They aren't crush washers like the oil drain plug. However they are pretty soft and squish a bit when you torque them.

 

Gotcha When you said crush washers the first thing that came to mind was oil drain plug.

I might have just forgot one. I will CSI it some day soon and report back

 

that really sucks hope your pitch isn't too steep (if you're DIY)... i used to roof back in the day and don't miss it one bit.

will do. I should have it wrapped up soon as the weather gets out of the tripple digits.

 

Well done

You guys even made me feel guilty about inferring that Dan murdered a transsexual prostitute.

 

I'm not gonna lie Ben, the fact that you were so quick to associate the two scares me a little...