Local Pittsburgh meet part deux
Speaking of E85 has anyone seen any change in the blend yet...
I did some logs on Sunday after filling up at sheetz in monroeville and it still seems to be the same at that location...
Afr logs still solid 11.7-12.0 range thru 3rd gear pulls and zero knock at 36psi pulls... I was half tempted to toss a few more degree of timing in her.... Just to see when it would actually start to knock.... It seems that E is just so knock resistant at any boost level I run shlt is sooo sick!!!
Sucks It's only a matter of time till it's switched up
Then it's either run 93... Retune for the winter blend or park this bish and find a small winter project for her haha !!!
I did some logs on Sunday after filling up at sheetz in monroeville and it still seems to be the same at that location...
Afr logs still solid 11.7-12.0 range thru 3rd gear pulls and zero knock at 36psi pulls... I was half tempted to toss a few more degree of timing in her.... Just to see when it would actually start to knock.... It seems that E is just so knock resistant at any boost level I run shlt is sooo sick!!!
Sucks It's only a matter of time till it's switched up
Then it's either run 93... Retune for the winter blend or park this bish and find a small winter project for her haha !!!
Nobody is coming. There is nothing in common with anyone of these guys and anyone of those guys.
Steelcity, I might have another Tactrix 3-port laying around (I use one just like this now, it works very well), but I am pretty sure I don't have the pigtail connect harness for it. I will take a look and post back.
Canexican, that Porsche must be flying! Stock numbers like that, the sticker price must be outrageous.
You came on the forum originally acting like a douche and you are being treated like one, what more did you expect?
Steelcity, I might have another Tactrix 3-port laying around (I use one just like this now, it works very well), but I am pretty sure I don't have the pigtail connect harness for it. I will take a look and post back..
Steelcity, I might have another Tactrix 3-port laying around (I use one just like this now, it works very well), but I am pretty sure I don't have the pigtail connect harness for it. I will take a look and post back..
I assume these are for the "pdk" auto tranny cars? Only mitsu it seems has been able to screw up the dual clutch systems.



