When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Evo GeneralDiscuss any generalized technical Evo related topics that may not fit into the other forums.
Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central
been trying to find an issue on mines, on WOT pulls my lights flickers and car sputters,
yet this morning with nice cool weather gave it some pulls and 35psi and no issue, wonder if a bad coil when its warm is making the car act up not sure .
been trying to find an issue on mines, on WOT pulls my lights flickers and car sputters,
yet this morning with nice cool weather gave it some pulls and 35psi and no issue, wonder if a bad coil when its warm is making the car act up not sure .
Sounds like the belt is slipping on the alternator to me.
so far grounds are good, cool weather came around and now has not done it at 35psi feels so good, but never thought about the belt causing it or loose it don't make a noise or anything but ill look into that thx!
Needed to swap out a blown parking lamp and was all prepared to drop the bumper till I cracked open the owner's manual to discover you only need to remove the wheel fender liner to gain enough access. I probably had to take off an equal amount of clips but at least I didn't need to roll around on the pavement.
Yeah I remember reading that somewhere before I bought the radiator, might have been you haha. I used the old one but its a replacement and not sure if it's 1.1 bar. Says 16 lbs on it. Think that will be alright?
I wouldn't use anything but the factory cap on it. Even if it's ugly, who cares if your car runs good?
well my front bumper paint was peeling off. where ever the last owner got it done at did it like ****... no prep or nothing looks like so car looks like this for now and I know paint on rear jdm bumper will come off soon too smh
