http://e3io.com/carpc ...Looking into building my own version of one of these

 

I like mirage... wonder if evoscan would run on that... might...

 

mp3car.com has a bunch of diy carputer stuff

 

Coincidentally, I am assembling the parts necessary to make this a reality:

 

Rooting for you bud! Make it happen!

 

Evoscan would definitely run on the E3IO...its windows 10

 

This must be that automatic Evo 7? Spotted those paddle shifters

 

The other giveaways are the instrument cluster with the gear indicator, as well as only two pedals. It could either be a Evo 7 GTA or an Evo 9 wagon.

The owner has probably done extensive re-wiring when he swapped from the stock steering wheel to this aftermarket wheel with paddle shifters.

The centre console has also been swapped to a manual Evo's so you can't really tell its an auto gear stick.

This satnav was available as a factory option, but has to be built-to-order, as the a/c trunking is different, and you'd lose the centre dash clock, along with hazard light button relocate.

Just waiting on a couple more trim pieces and the work can begin.

 

If you could somehow order parts from Taiwan for the Virage IO, you Stateside guys can too:

 

Would be so nice to be able to plug up tactrix data log to a screen.....

 

This is amazing, but so damn pricey just for the concept of multimedia in the vehicle.

I did some research into it and found this,

https://www.ebay.com/itm/2DIN-IN-DAS...4383.l4275.c10

Just need some experience with a raspberry pi and you'll pretty much have a comparable unit for 1/4 of the price.

May have to tackle this project once I get some loose funds

 

right -

https://www.carjoying.com/7-inch-dou...amera-786.html

^ this is what i'm using, works great. just wish the evoscan app was available and usable

 

yah i actually asked tactrix about getting a serial data stream out of the 2.0 while its doing stand alone logging but they said the hardware didn't support it.

 

Yes, I purchased this above.... for the box and 7" HDMI Touchscreen....'m gutting the Rasberry PI and starting fresh with an ASRock H270M-ITX/ac LGA 1151 Intel H270 HDMI SATA 6Gb/s USB 3.1 Mini ITX Motherboard, Intel i7-7700 Kaby Lake Quad Core Processor 3.6GHz & Cooler Master Hyper 212 EVO RR-212E-20PK-R2 CPU Heatsink Cooler, Team T-Force DARK 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2400 Memory, TOSHIBA 512GB Solid State Drive M.2 2280 PCIe NVMe, MeLE F10 Deluxe 2.4GHz Wireless Fly Air Mouse Keyboard Controller ...plus a bunch of other stuff. Going to run windows 10 and GPS. Just waiting on a few things to arrive...Can you say...The Learning Curve.....it's gonna be fun!

 

i know torque won't do the logging evoscan does, but i'm curious about using torque & and obdlink bt tool. It'll at least show temps and stuff but IDK if it will show oil pressure, which is what I'm most curious about