Fayetteville/Ft Bragg/Pope AFB -- TAKE TWO!!!
Evolved Member
iTrader: (37)
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
Well, I was told today, off to the dirt again in a week or so. ill be back in september 
. Hope to see some more cars in the low 12 or 11 (Jason). good luck to you guys. My car will sit at the paint shop, so ill have somm to play when i get back. Beside the turbo and the cams. The bottom end is done, so everything else is bolt on. later.
. Hope to see some more cars in the low 12 or 11 (Jason). good luck to you guys. My car will sit at the paint shop, so ill have somm to play when i get back. Beside the turbo and the cams. The bottom end is done, so everything else is bolt on. later.
Evolved Member
iTrader: (37)
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
you will need help installing it so you can tighten it up... when we put it on with it not on the car the fitment was actually not the greatest, but i almost wanna say they molded it that way on purpose, because when it is on the car and you are looking at it... the places it doesnt fit right on you cant see because the way the pieces are angled. Look at the areas where the lip angles to the wider parts. Pay close attention to where the white meets the lip and see if you see anything.
you will need help installing it so you can tighten it up... when we put it on with it not on the car the fitment was actually not the greatest, but i almost wanna say they molded it that way on purpose, because when it is on the car and you are looking at it... the places it doesnt fit right on you cant see because the way the pieces are angled. Look at the areas where the lip angles to the wider parts. Pay close attention to where the white meets the lip and see if you see anything.
everything looks like it fits good in the pics...cant see anything wrong but in person it could look totally different
Thread Starter
Evolved Member
iTrader: (44)
Joined: Jan 2004
Posts: 1,584
Likes: 0
From: High-Plains Desert
It doesn't look bad now that it's on. It was questionable during the "fitting" phase but it's even all the way around. Definitely a good quality CF piece....right up until Jason curbs it!
