Notices
Southeast Region Includes AL, FL, GA, NC, SC, TN, KY.

ALABAMA.. who is all here?

Thread Tools
 
Search this Thread
 
Old Dec 9, 2009 | 08:06 AM
  #1696  
loofee's Avatar
Evolving Member
iTrader: (24)
 
Joined: May 2007
Posts: 287
Likes: 3
From: Saks, Alabama
which I have the $$ for those ( for the wife's car)..but I still need to get with you about my exhaust got the $$, need to arrange the schedule...so many things to in so lil time, I almost hate the end of the year.. Xmas parties are always good tho. C
Reply
Old Dec 9, 2009 | 12:30 PM
  #1697  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
we need to do our annual Christmas get together....juss lemme know when you are ready....got Sean's car next to work on the roll cage, but there are 2 slots in the shop, we can always fit yours in. I just got finished with Hank's civic, did a turbo manifold, IC piping, downpipe, full dual tip exhaust. I made the 5 inch tips out of big rig stacks, they turned out way cool.
Reply
Old Dec 9, 2009 | 03:23 PM
  #1698  
linuxman51's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 299
Likes: 0
From: montgomery, al
argh. clutch is out. charging batteries for the camera again.... probably time for a new set (and a new camera). its smoked. nicely smoked. not that that wasn't expected.
Reply
Old Dec 9, 2009 | 04:14 PM
  #1699  
linuxman51's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 299
Likes: 0
From: montgomery, al
and finally after 45 minutes of resizing..
http://www.pbase.com/kdh51/smoked_clutch&page=all

you can see a couple drops of oil on the flywheel side disc, this occured when the damn thing slipped out of my hand and found the small amount of gear oil that was oozing from the t-case.

Last edited by linuxman51; Dec 9, 2009 at 04:23 PM.
Reply
Old Dec 10, 2009 | 11:01 AM
  #1700  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
It really doesn't look that bad. I think I see lots of glazing/hot spots maybe in the pics. Hopefuly they(clutch) will take care of you. It was cool to meet you "K" last night even though it was cold as a witches upper torso section...lol...see you tomorrow...
Reply
Old Dec 10, 2009 | 11:07 AM
  #1701  
linuxman51's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 299
Likes: 0
From: montgomery, al
yeah it was pretty chilly. how far off the intarstate is your shop? or pm me the address, whatever works.
Reply
Old Dec 10, 2009 | 11:12 AM
  #1702  
loofee's Avatar
Evolving Member
iTrader: (24)
 
Joined: May 2007
Posts: 287
Likes: 3
From: Saks, Alabama
stay warm guys,,its gonna be cold tonight too.
Reply
Old Dec 10, 2009 | 11:21 AM
  #1703  
loofee's Avatar
Evolving Member
iTrader: (24)
 
Joined: May 2007
Posts: 287
Likes: 3
From: Saks, Alabama
btw, this is for this Saturday the 12th if anyone want to come. its only $5/ car to come in and watch. C


_2009 Santa Time Trials for Toys for Tots_

The Event

We are hosting a Time Trial/ Track Day at Little Talladega in Alabama. The event will be December 12, 2009. Anyone is welcome from the novice, to the hardcore track enthusiast. This event will be for Toys for Tots and we ask for each person running in the event to bring 2 unwrapped toys (one boy and one girl). Track will open at 8AM CST. We would like to have the first car ON TRACK at 8:30AM. Please be on time and prepared. Food will be free for lunch during the event. There will be 7 run groups ranging for beginner to advanced and each person will be placed accordingly.



When: December 12, 2009, Saturday
Where: Talladega Gran Prix Raceway
Who: Anyone and Everyone*
Cost:$75

*There will be a max limit of 60 cars for the event, so please register as soon as possible



Registration- When you register, please fill the form out fully as well as send a photo of the car you will be driving. Once your form is received, we will send the link for the payment via PayPal.
Rules and Tech- Please go over the two forms listed on this page. We will be holding a tech inspection the morning of the event. Make sure you and your car are prepared.

We are looking for sponsors to help with the event. If you would be interested in becoming a sponsor for the event, feel free to call or email.

If you have any questions, feel free to contact me (Matthew) at 404-844-3686, or email at itrackmotorsports@gmail.com


HOPE TO SEE EVERYONE AT THE TRACK!

--------------------------------------------------------------------------------
Reply
Old Dec 10, 2009 | 04:18 PM
  #1704  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
Hey guys; "C"--- sounds like an awesome event to go to. Anyone local to me going ?

For any of you out there that might want to know; The EPM shop is open for business. We do custom Design and fabrication. From Custom Turbo Manifolds to Intercooler Piping and even Carbon Fiber fabrication. We have the capability to do most mechanical repairs from Tranny work to Cam Installs, etc.. We also can get you some great pricing on Modification parts. EPM has also teamed up with one of the best local tuners around. We are big time into E-85 since it is available in our area now. By running E-85 Look at around 40-50hp gain with the appropriate additional fuel added. We do work on Evo's but are not limited to that platform. Our latest project is just rolling out the shop as I write this. A Honda Civic Hatch, where EPM designed a custom Turbo Manifold, Intercooler piping, Down pipe, full daul tip exhaust, various brackets, and we also installed proportioning valves for the rear brake system. The Civic in question has an upgraded Baer Brake system, going from drum rears to hugely oversized rotors/calipers meant the owner was experiencing lockup on the rear brakes. With these Proportioning valves we can dial in the correct amount of pressure to send to the rear calipers.

This is only one example of what EPM is capable of. One of our local Evo owners had his Evo in for a Shep Trans Transfer Case rebuild and what we call our stage 2 Power Modification upgrades. We went with a Custom Hydro formed Downpipe, larger 1200cc Injectors, Custom ECU Tune with dual graded fuel maps with user friendly switchover access between 93 pump and E-85. We also upgraded to a walbro 255 fuel pump, and EPM test pipe. His final numbers were right @ aprox.. 390 HP and the same ft/lbs torque. This owner will be upgrading and following additional power mods soon. We are hoping to see him go from his current 11.9 to eventually the 10's.





Give EPM a call or shoot me an email if you are in need of some custom design/fabrication work or even modification parts for your Evo or your current project car. We would be more than glad to help you achieve your Power/Tuning and Suspension goals. We offer EvoM users a discount, so be sure to mention where you heard about EPM. Everyone have a great 2010 coming up....

EPM shop

141 Wilson Drive
Montevallo, Al
35115

shop phone 205-834-1901

QPYoung3@Gmail.com
Reply
Old Dec 10, 2009 | 08:54 PM
  #1705  
rayman0690's Avatar
Evolving Member
15 Year Member
Photogenic
iTrader: (15)
 
Joined: Dec 2009
Posts: 254
Likes: 3
From: Alabama
Huntsville Evo

Just saw the thread, wanted to drop a line and say that I have an 03 Rally Red Evo in Huntsville. I think we only have about 10 or less Evo VI's through X's running around. I don't know many
Reply
Old Dec 10, 2009 | 10:37 PM
  #1706  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
Roll Call---->
Q=06/RR/MR
Jeremy=?/WW/RS
Matt=06/GG/MRse
C=?/AS/GSR
Sara=?/BBY?GSR
ChrisJ=?/RR/GSR
BrianC=06/TB/GSRse
Kenny"Linux"=?/WW/GSR
Cesar=06/GG/GSR
Joey=06/RR/RS
and about 5 or more others
"WFP"=/TB/GSR

Alright everyone....add to the list...
Reply
Old Dec 11, 2009 | 05:33 AM
  #1707  
linuxman51's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 299
Likes: 0
From: montgomery, al
Originally Posted by Q@EvoPowerMods
Roll Call---->
Q=06/RR/MR
Jeremy=?/WW/RS
Matt=06/GG/MRse
C=?/AS/GSR
Sara=?/BBY?GSR
ChrisJ=?/RR/GSR
BrianC=06/TB/GSRse
Kenny"Linux"=03/TB/GSR
Cesar=06/GG/GSR
Joey=06/RR/RS
and about 5 or more others
"WFP"=/TB/GSR

There are two more AS 03's in montgomery running around somewhere, but I dunno if they're members of the forum or not. There's also a kitted out 03 RR.
Reply
Old Dec 11, 2009 | 06:12 AM
  #1708  
whoflungpoo's Avatar
Evolving Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 167
Likes: 0
From: Birmingham, AL
Roll Call---->
Q=06/RR/MR
Jeremy=?/WW/RS
Matt=06/GG/MRse
C=?/AS/GSR
Sara=?/BBY?GSR
ChrisJ=?/RR/GSR
BrianC=06/TB/GSRse
Kenny"Linux"=03/TB/GSR
Cesar=06/GG/GSR
Joey=06/RR/RS
and about 5 or more others
"WFP" = Justin = 03/TB/GSR/
Reply
Old Dec 11, 2009 | 07:18 AM
  #1709  
TouringBubble's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 2,639
Likes: 3
From: Chelsea, AL
Roll Call---->
Q=06/RR/MR
Jeremy=?/WW/RS
Matt=06/GG/MRse
C=?/AS/GSR
Sara=?/BBY?GSR
ChrisJ=?/RR/GSR
BrianC=06/TB/GSRse
Kenny"Linux"=03/TB/GSR
Cesar=06/GG/GSR
Joey=06/RR/RS
and about 5 or more others
"WFP" = Justin = 03/TB/GSR/
Tyler = 06/GG/MRSE
Reply
Old Dec 11, 2009 | 11:28 AM
  #1710  
loofee's Avatar
Evolving Member
iTrader: (24)
 
Joined: May 2007
Posts: 287
Likes: 3
From: Saks, Alabama
Q: we will be there, I didnt register to run because I didnt have any tires, now that I do..its too late, So i'll be there to watch and take pics.
Reply



All times are GMT -7. The time now is 01:05 AM.