Utah Evos
We normally stock them.
I am not familar with your build but are you replacing them with the one by one method or pulling the head?
IMO the stock studs are better then doing the one by one method. 90% of the time you will create a oil leak down the back of the block. The stock studs hold up pretty well until upwards of 25 psi.
I am not familar with your build but are you replacing them with the one by one method or pulling the head?
IMO the stock studs are better then doing the one by one method. 90% of the time you will create a oil leak down the back of the block. The stock studs hold up pretty well until upwards of 25 psi.
I forget about Rallisport..I gotta get used to actually having someone local who might carry what I need
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
There we go Jake 
fixed
fixed
June 13th Antelope Island meet (11-12)
Wes- Burgers, hot dogs
Fairclough - bringing Burger Buns, Hot Dog Buns, and some chips.
Jake (2) - ketchup, mustard, mayo, miracle whip, pickles, lettuce, onions tomatoes, cheese (Amenities)
33/Ryan (2) - charcoal, fluid, grilling ****, and KEG
Dallin - Plates, Cups, Silverware - Bringing Cookies and Brownies
Juan (2) - Tortilla chips, doritos, salsa, bean dip, cheese dip, and soda
Trent (2)
Sam
Trevor
Shyleen (2)
EVILBLOODBROTHA (2)
AWD Ninja
Wes- Burgers, hot dogs
Fairclough - bringing Burger Buns, Hot Dog Buns, and some chips.
Jake (2) - ketchup, mustard, mayo, miracle whip, pickles, lettuce, onions tomatoes, cheese (Amenities)
33/Ryan (2) - charcoal, fluid, grilling ****, and KEG
Dallin - Plates, Cups, Silverware - Bringing Cookies and Brownies
Juan (2) - Tortilla chips, doritos, salsa, bean dip, cheese dip, and soda
Trent (2)
Sam
Trevor
Shyleen (2)
EVILBLOODBROTHA (2)
AWD Ninja
I forget about Rallisport..I gotta get used to actually having someone local who might carry what I need
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
Cylinder Pressure is what really limits the head studs. Running 22psi you will be fine as long as you are not running crazy amounts of timing(well past minimum best timing)
People have reliably made 400 hp on the stock head studs. With the setup in your signature I would not worry about them.
I did them on my Evo back in 04 when the one by one method was the craze and sprung a oil leak.
I could have sold prob hundreds more sets of head studs then I have. I talk about 90% of the people that call in out of them. Probably not good for business but it is the right thing to do.
If you do the head studs remember you need to re-torque them down about 4-5 times after heat cycling them for a couple days. They will come loose. I have seen someones head studs loosen up to around 50 ft/lbs they were also better off with the stock bolts.
$100 per fuel rail and if you haven't got a pump yet then see if rallysport has one 
looks like boost controller was sold a few months ago lol sorry
+1
I need a valve cover gasket when I replace that I will check the torque on mine, it's never a bad thing
looks like boost controller was sold a few months ago lol sorryI need a valve cover gasket when I replace that I will check the torque on mine, it's never a bad thing
Last edited by wesside; Jun 5, 2009 at 10:13 AM.
[QUOTE=wesside;7138549]$100 per fuel rail and if you haven't got a pump yet then see if rallysport has one looks like boost controller was sold a few months ago lol sorry
+1
I need a valve cover gasket when I replace that I will check the torque on mine, it's never a bad thing[/QUOT
i already have a 255
looks like boost controller was sold a few months ago lol sorry+1
I need a valve cover gasket when I replace that I will check the torque on mine, it's never a bad thing
[/QUOTi already have a 255
I forget about Rallisport..I gotta get used to actually having someone local who might carry what I need
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
What ya need? between my friend steve and I
AMS fuel rail (2) need fittings to go to small cuz they were from my buddy's drag evo, C.O.P(coil on plug) , exhaust manifolds (2), intake manifold, throttle body (2) evo 8 wheels, sunroof, turbo xs boost controller, stock mr rotors (5,000 miles) also calipers, ported 8 turbo and prob other stuff that's off the top of my head
Ya I hate are weather in are area
I don't think they'll even fit in the back of the wagon
No, still got it wrong
Lately it's been like ****ing Oregon, Seattle, and London. Ridiculous. I wanna wash my car and go for a drive up East and take photos!
No, still got it wrong
Lately it's been like ****ing Oregon, Seattle, and London. Ridiculous. I wanna wash my car and go for a drive up East and take photos!
Lol thought it was already 2 weeks well then good thing cuz of the rain...let's maybe go out to rmr next Friday.?