how to launch me car
#1
Newbie
Thread Starter
Join Date: Dec 2006
Location: Jacksonville, Florida
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
how to launch me car
i know it sounds funny but i cant really launch my car!!! all of my friends have tried and and they cant do it either... can some1 please tell be because it is obviousley not the same at a rear wheel drive car...thax
#4
Evolved Member
iTrader: (8)
Here is my tech. w/2step. ((This should be done only at the track)) ((And be careful - or your clutch is not going to like you much longer))
At the lights use shallow stage. This means as soon as you engage the 1st amber, slowly roll into the 2nd amber. As soon as that is lit, stop. ((This gives you a few extra inches to get it moving before the timers come on.))
Clutch in, gas to the floor, bouncing off 2step. Walk the clutch out a little bit just to the point that you feel all the slack coming out of it. Almost to the point of moving the car - hold it right there.
Amber, amber, green --- walk the clutch back fast but not dumping. Hold on for dear life and you are off and running (of course go before you see green - its all in the timing).
When done right it feels like all 4 are spinning and you are going like a bat-outta-hell.
On stock turbo and cams shift at 6800 to 7000 in all gears. You should be in 4th through the traps (GSR/RS for gearing)
At the lights use shallow stage. This means as soon as you engage the 1st amber, slowly roll into the 2nd amber. As soon as that is lit, stop. ((This gives you a few extra inches to get it moving before the timers come on.))
Clutch in, gas to the floor, bouncing off 2step. Walk the clutch out a little bit just to the point that you feel all the slack coming out of it. Almost to the point of moving the car - hold it right there.
Amber, amber, green --- walk the clutch back fast but not dumping. Hold on for dear life and you are off and running (of course go before you see green - its all in the timing).
When done right it feels like all 4 are spinning and you are going like a bat-outta-hell.
On stock turbo and cams shift at 6800 to 7000 in all gears. You should be in 4th through the traps (GSR/RS for gearing)
Last edited by Smike; Jan 7, 2007 at 07:59 AM.
#5
Evolved Member
iTrader: (16)
Join Date: Oct 2005
Location: Newport News, VA
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
if you dont have 2 step(which I believe you do, correct me if Im wrong someone), rev to 5500rpm and slip your clutch. If you are unsure of what that means, Ill explain. Rev to 5500rpm, slowly release the clutch until you start moving, the more you move, the faster you can let the clutch out. With practice, itll get much easier. My advice, get 2 step launch control and use it when launching. What ever you do: DO NOT DUMP THE CLUTCH!!!
Trending Topics
#11
Evolved Member
iTrader: (56)
https://www.evolutionm.net/forums/sh...d.php?t=233376
https://www.evolutionm.net/forums/sh...d.php?t=230092
https://www.evolutionm.net/forums/sh...d.php?t=213138
https://www.evolutionm.net/forums/sh...d.php?t=203109
https://www.evolutionm.net/forums/sh...d.php?t=213943
https://www.evolutionm.net/forums/sh...d.php?t=188611
https://www.evolutionm.net/forums/sh...d.php?t=230092
https://www.evolutionm.net/forums/sh...d.php?t=213138
https://www.evolutionm.net/forums/sh...d.php?t=203109
https://www.evolutionm.net/forums/sh...d.php?t=213943
https://www.evolutionm.net/forums/sh...d.php?t=188611
#12
Evolved Member
iTrader: (56)
cant rev to 5500rpm without
https://www.evolutionm.net/forums/sh...d.php?t=165759
https://www.evolutionm.net/forums/sh...d.php?t=165759
#14
Evolved Member
iTrader: (16)
Join Date: Oct 2005
Location: Newport News, VA
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
cant rev to 5500rpm without
https://www.evolutionm.net/forums/sh...d.php?t=165759
https://www.evolutionm.net/forums/sh...d.php?t=165759