Tephra, just wondering if you had an idea of release of 96420011

Thanks man!

 

I can confirm that 88570008 fix is working great.

I have just got back from testing all features except for NLTS (UK IX FQ models have no 2nd clutch switch) and Rear 02 Sensor Simulation (as UK IX FQ models don't have a 2nd 02 sensor).

Everything works as it should, another great job Dave

 

donation sent, keep up the good work

 

I missed this one...

Whats the difference between this version and the original version 5?

 

The orignal had a small bug in it, which ment the alt map timing maps were not scaled correctly, and if you adjusted the boost and wastegate settings it corrupted the low octane timing map.

So he has now corrected it and it's working perfectly.

 

Oh, more work!!!!

Here we go again...hehe

 

96420011 will be out today...

 

is this correct?

<scaling name="ThrottlePercentage" units="%" toexpr="x/255*100" frexpr="x*255/100" format="%.0f" min="0" max="100" inc="1" storagetype="uint16"/>


?

 

do I need a little or big at the end?

 

Yes

ecuflash 1.29 and earlier use little endian.

1.30 and later use big endian.

But the above line is complete as it is, no need to add anything to the end of it.

 

wasn't it:
1.30 and below = little
1.31 and above = big
?

 

[homer simpson voice] WOO HOO!!! [/homer simpson voice]

 

You could be right, I don't think I ever used anything before 1.30, and when I started to get into ecuflash, it was just as it changed over, so most of the xml's out there were all mixed up anyway

 

amen to that....just hope it works with the 96420008 ROM ID aswell...

 

96420011 UP

Please test it fully guys, I have had a few minor bugs pop up with other ROM's (from the fixes you can see above)

It is important that you report anything that looks funny (like maps) or any behavior that you don't expect. And don't go WOT until you verify cruise/idle is working