BUMP for the patch becoming availabe!!!

 

Does this patch work on roms previous to 5.10? I'm running one with valet but not with map switching. I would like to completely remove the rear O2.

 

i see a lot of talk about 0031, does this patch get rid of 0141 also???? i used the instructions on page 9 for 9653 and i still get P0141.

 

Mr.Fred / Tephra, have either of you had a chance to look into the heater circuit patch for 94170015?

 

This thread has made my head spin. Is Acamus' code from #117 insufficient for the 88590015 ROM?

 

For removing CEL it is insufficient, apply mrfred's patch also.

 

so i need a patched rom then... the way i read it, i thought this first part was the patch.... and then you make the changes indicated.

<table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="34C4E" type="1D" level="1" scaling="Hex16"/>

<table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="34CCE" type="1D" level="1" scaling="Hex16"/>

<table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="34CD4" type="2D" level="1" scaling="Hex16">
<table type="Static Y Axis" elements="2">
<data>34CD4</data>
<data>34CD6</data>
</table>
</table>

 

If I'm not mistaken, follow MrFred in post 59:

https://www.evolutionm.net/forums/6691277-post59.html

And then follow Acamus in post 117:

https://www.evolutionm.net/forums/6727392-post117.html

I haven't attempted this yet and not even sure what order it needs to be done in. If someone else can confirm, it'd be appreciated. Inspection is up in 2 days. (I should just put my O2 back in.)

 

i am starting to get that impression but those links are for 88590015, i am using 96530006 which is in post 135. so i guess my next question is...

does anyone have a patched 96530006 ROM?

 

sooo, whats the patch for 88590015?

 

RTFT?

https://www.evolutionm.net/forums/6820569-post184.html

https://www.evolutionm.net/forums/6811116-post182.html
https://www.evolutionm.net/forums/6997439-post219.html

 

Okay.... do we have to use the rom posted or does this work with existing roms?

The reason I ask is somewhere in this thread someone stated it will work with 5.10.

 

No - just copy the definitions into the ecuflash xml, then open your rom and copy the values from mrfreds rom to your rom with the new tables.

 

Dangit... that's what I did and I still flag a CEL after I remove the O2.

The only change is I copied the values from #117.

I modded the XML with the junk in 117 then modified the values with what is shown in 117.

Do I really need anything that Mrfred posted?

 

yeahhhh, check post 59.