Sometimes you need to close the ROM and open it again to reload the XML. If you feel comfortable, you can just add the line to the XML.

I've been testing this, and so far so good! I need a fuel relay before I test WOT to confirm that AFRs aren crazy, but 3/4 throttle seems ok.

A CEL free dash... That's something I haven't seen in a while!

 

 

Yep got it right the second time not really sure what I did the first time but I suspect I did something incorrectly so want to delete whatever I did the first time. Anyone? Should I just deinstall and reinstall 1.42 and then scan ECU and do it again?

 

I added the XML to post #1 for this DTC disable..

Just copy/paste that one...

 

Tephra should I delete that extra line of code in my 52680018 xml file before downloading to the car? I don't want to brick the ECU.

 

what line?

 

If you can find it, feel free to delete it and add it how you want it.

It won't actually change anything with your ROM unless you make the change in ECUFlash, so you don't really have to worry about that.

 

wow! i cannot wait to try this out! i thought i'd never see a code free dash. i was getting used to clearing my dtc with pcmscan every 30 miles, but this rocks though!

 

As posted on last page.

 

You can delete it Guru. Just replace that line with the line tephra posted:

<table name="DTC P0139/P0140 Disable 0x1 -> 0x0" category="Misc" address="503b2" type="1D" scaling="Hex8"/>

 

yeh i dont know where that line came from??!?

 

Hey Chris,

Did these disable codes get rid of the rear 02 cel as well. Or is that one still there?

 

Yep, that's what this one finally solved!

PM me about it later if you like.

 

i was going to test it out today but it snowed again, damn it!

 

looks liek 526900XX uses the same address as 526800XX.

Give it a go - but ensure your AFR is what you expect