Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

500whp stock block club

Thread Tools
 
Search this Thread
 
Old Apr 5, 2007 | 06:54 PM
  #136  
Sean@Iveytune's Avatar
Former Sponsor
iTrader: (14)
 
Joined: Mar 2004
Posts: 1,849
Likes: 1
From: Linden, NJ
Ray,

Thanks!

Sean
Reply
Old Apr 5, 2007 | 06:56 PM
  #137  
Sean@Iveytune's Avatar
Former Sponsor
iTrader: (14)
 
Joined: Mar 2004
Posts: 1,849
Likes: 1
From: Linden, NJ
Originally Posted by G20
At least more than 2 years since I've been running my 03 evo with 530whp for more than 2 years. Yes! I went to drag strips almost monthly and running around on SoCal freeway every weekend. Just make sure you get a good tune (mine is Tuning Tech) and monitor the car's condition (i'm using Zeitronix).
Monitoring the car is the most important, very very important.

Sean
Reply
Old Apr 11, 2007 | 05:58 PM
  #138  
ETS Michael's Avatar
Former Sponsor
iTrader: (91)
 
Joined: Mar 2007
Posts: 8,685
Likes: 54
From: Vancouver, WA
Since the stock block boost only record is listed on the first page at 592whp, this should be it. My EVO running all ETS components at 598whp uncorrected. TorqueFreaks has the boost + nitrous stock block record at 669whp on the same ETS T461 turbo kit, ETS intercooler kit, etc.



Tom
Reply
Old Apr 12, 2007 | 05:54 AM
  #139  
Aloosh's Avatar
Newbie
 
Joined: Oct 2006
Posts: 52
Likes: 0
From: Dubai,U.A.E
WOW very imresive i just wanted to c how lond will your block hold it dont get me wrong hope nothing happens but i just go with physics
Reply
Old Apr 12, 2007 | 06:04 AM
  #140  
Evo_7's Avatar
Evolving Member
iTrader: (1)
 
Joined: Oct 2006
Posts: 378
Likes: 0
From: Karachi,PK
Awsome Numbers!!!
Reply
Old Apr 12, 2007 | 06:43 AM
  #141  
High_PSI's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Apr 2006
Posts: 4,152
Likes: 17
All the Stock blocks I see blowing up have detonation issues. Tuning is the key. Power doesn't kill these motors, detonation does.
Reply
Old Apr 12, 2007 | 07:28 AM
  #142  
thatguy's Avatar
Evolved Member
iTrader: (5)
 
Joined: Nov 2006
Posts: 638
Likes: 0
From: milfburn
Originally Posted by High_PSI
All the Stock blocks I see blowing up have detonation issues. Tuning is the key. Power doesn't kill these motors, detonation does.
I agree but constantly running 30+ psi on a gt35 even if correctly tuned has to put additional stress on the motor, and should shorten its lifespan, but getting a safe, reliable, good tune is the key.
Reply
Old Apr 12, 2007 | 09:44 AM
  #143  
BOOSTED04's Avatar
Newbie
iTrader: (7)
 
Joined: May 2006
Posts: 87
Likes: 0
From: Plaistow NH
sick!!
Reply
Old Apr 12, 2007 | 10:09 AM
  #144  
High_PSI's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Apr 2006
Posts: 4,152
Likes: 17
Yeah 30PSI and 500 WHP wil add stress to any motor
Reply
Old May 4, 2007 | 09:08 AM
  #145  
Ang Wen Yan's Avatar
Thread Starter
Evolved Member
 
Joined: Jun 2004
Posts: 2,552
Likes: 1
From: KL,Malaysia
Congrats to rACerS for runnig 10's on stock block
Reply
Old May 4, 2007 | 11:51 AM
  #146  
apagan01's Avatar
Account Disabled
iTrader: (299)
 
Joined: Dec 2006
Posts: 4,863
Likes: 5
From: digging for oil
yeahh !! you can put 800whp it's a matter of time how long it will handle the loads, its like everything else you can push it to it;s limit, but the integrity of the equipment gets jepeardized eventually it will break.

But, congrats on the numbers is a really good effort.
Reply
Old May 4, 2007 | 11:56 AM
  #147  
DRFTKNGG's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2004
Posts: 1,073
Likes: 0
From: FLORIDA
I think the next question here is...How long will the stock block last at those numbers?
Reply
Old May 4, 2007 | 12:34 PM
  #148  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired


RACers dyno sheet that produced a 10.8 stock block EVO 9



My dyno sheet from my stock block EVO8 MR

Thanks, Andy
Reply
Old Jun 16, 2007 | 09:10 PM
  #149  
34Turbo's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2004
Posts: 814
Likes: 0
From: Dallas
Well, I made good power on the stock block but currently I'm throwing in some eagle rods and ross pistons to push the limits!
Reply
Old Jun 17, 2007 | 07:51 AM
  #150  
1badgsex's Avatar
Evolved Member
iTrader: (23)
 
Joined: Jan 2005
Posts: 630
Likes: 0
From: bucks county, pa/philly
seems like alot of ppl are hating on this thread i see alot of " OH I BET IT BLOWS UP or "yeah how long is it gonna last comments, i thought this was about seeing how strong the stock motors are not putting them down, and all the comments came from ppl with evos, to me seems like some ppl are hating on other ppl with big power just my opinion.....
Reply



All times are GMT -7. The time now is 04:07 AM.