35r

 

When does a green reach 28 psi on a 2 litre generally? I sort of thought it was about 4k in 3rd gear. Am I wrong?

 

My suggestion for an everyday 450 HP car - sorry the lines are hard to see - if you need a little more, 35R would fit the bill.

Mike Huml
Slowboy

 

I can't speak from our experience on this one because we've not tested one, but I would imagine that it's in that ballpark or just a bit quicker based on its relatively small size and results I've seen from others.

Tom

 

On the dyno My green reached 28 psi @ 3500\3600

 

has anyone looked at the new 61mm turbo setup from booslogic. that is the setup i will be going with. as well as meth on the stock 2.0.

 

I am going with the 58 trim from ETS Tom with a 2.3/meth. I think that will give me the power i want and the spool is great on them. Any one like that set up. Thanks ETS Tom and every one else for the comments and u will be hearing from me soon

 

You have made a wise decision my friend

 

my question is how are you at 316whp did you make that up

 

No i did not make that up. Lest see here is my mod list. aem intake,fullexaust execept still stock cat. hallman mbc at 21psi, greddy camgears, buddyclub 272 cams,ported exaust manifold. And a tune by tunning tec. When i went on the dyno jet it put down 316whp. Why do u ask that? Its not hard to get our cars in the 300s. If i get a test pipe i should be close to 330whp. But i really want around 400-500whp that is why i am going with the 58 trim.

 

You are right. 4k it is.