!!ETS 61mm Tuned!!
I'm actually going to be injecting methanol with my setup so I will be fine with the 880's. I inject lots of methanol with two 1.0mm nozzles from Aquamist 
haha. I was running about 28psi on the stock turbo and wasn't even close to maximizing the duty cycle of the stock injectors, so I shouldn't have any issues running 30psi with the combination of the 880s and 2 x 1.0mm nozzles from Aquamist. I am going to stick to 30psi because I am still on the stock block. Once I build my block and want to run more boost pressure, I will look into bigger injectors if I have to.
The compressor on the turbo is .04mm smaller than that of the GT35R and, per Garrett's website, the turbine wheel diameter is 68mm, where the PT61 turbine is 70.1mm.
haha. I was running about 28psi on the stock turbo and wasn't even close to maximizing the duty cycle of the stock injectors, so I shouldn't have any issues running 30psi with the combination of the 880s and 2 x 1.0mm nozzles from Aquamist. I am going to stick to 30psi because I am still on the stock block. Once I build my block and want to run more boost pressure, I will look into bigger injectors if I have to.The compressor on the turbo is .04mm smaller than that of the GT35R and, per Garrett's website, the turbine wheel diameter is 68mm, where the PT61 turbine is 70.1mm.
I am running the 57 trim ETS turbo kit with all of the basic mods needed to run the car hard....
. I love the spoolup on the 57 trim....its almost stock like and boost hits hard and the car just screams all the way to redline 
. I am getting a stroker and meth ordered here in a couple of weeks and it will be installed in the early spring so i am really considering to go with the 61 trim......GO BIG OR GO HOME.................
. I love the spoolup on the 57 trim....its almost stock like and boost hits hard and the car just screams all the way to redline . I am getting a stroker and meth ordered here in a couple of weeks and it will be installed in the early spring so i am really considering to go with the 61 trim......GO BIG OR GO HOME.................
Thread Starter
Evolved Member
iTrader: (32)
Joined: Mar 2005
Posts: 1,675
Likes: 0
From: PottsVegas, PA
Thread Starter
Evolved Member
iTrader: (32)
Joined: Mar 2005
Posts: 1,675
Likes: 0
From: PottsVegas, PA
Thread Starter
Evolved Member
iTrader: (32)
Joined: Mar 2005
Posts: 1,675
Likes: 0
From: PottsVegas, PA
Ok guys, I was able to come up with one more video. Videos don't really ever do cars much justice but I know you guys wanted to see another one. This is a 3rd-4th gear video on the highway, the camera car is going between 65 and 70mph. This will give you guys an idea of how well the larger turbos pull in 4th gear. Once again, this is only at 24psi and pump gas. 
http://www.youtube.com/watch?v=o2by7jMS19s
http://www.youtube.com/watch?v=o2by7jMS19s
Ok guys, I was able to come up with one more video. Videos don't really ever do cars much justice but I know you guys wanted to see another one. This is a 3rd-4th gear video on the highway, the camera car is going between 65 and 70mph. This will give you guys an idea of how well the larger turbos pull in 4th gear. Once again, this is only at 24psi and pump gas.
http://www.youtube.com/watch?v=o2by7jMS19s
http://www.youtube.com/watch?v=o2by7jMS19s
.......RT615s+Ice=Crash 
. I am seeing its gonna be nice in about a week. I will try to get some vids then.