Installed HKS UICP and SSQV W/ Recirculation. Ran Like **** so I took it back off and re installed my Greddy RS. The greddy ive been running for about 1 year + with no trouble on a AMS Street tune.

Well the car still runs like ****! Wont go past 4K RPM, stalls, missfires, and dumps boost at about 10psi.

Here are the codes....

P0113
P0102
P2228
P0069


This is my daily and i need it to run right again.

thanks
Chris

 

I dont have a manual at the moment for those codes and I am at work, but removing the battery and resetting the ECU doesn't clear them?

Can someone look up these codes for this guy?

 

make sure your Maf connector plug is all the way in.
My car was doing the same thing, found out i didn't push the connector all the way in.

 

I have a scan tool, thats how i got the codes and I used it to erase them and it seemed like the came right back as soon as the car was started. Like with in seconds.

 

Damn I feel like a idiot......... Ive been working on and building race cars for over 10 years. I was also a Mechanic in the army for 6 years........ and guess what! I forgot to plug the MAF Back in.

Let me see what happens now.

I do appreciate the fast responses though. this site is a miracle

 

found these:
PO113=Air >Intake Sensor
PO102=Mass Air Flow (MAF) Circuit Low Input

 

LOL....I knew it.

 

You know what when I drove the first time and it ascted up I said to myself "it seems like my MAF is broken"