I have on 04 Evo 8 with a stock bottom end and head(except for cams and head studs) i wanted to get a new turbo. Something that was fairly quick to spool but yet put down some power. When the red came out i was leaning towards that but then i came across the 3065 and was thinking about doing that. I really can't find to much info on the spool up on both or the power on the 3065. So i need your opinions on what you think i should do and what would be a good turbo.

 

FP red will be better
cuz if i am not wrong
i have seen dyno chart of both
FP red spool abit faster

 

I am pretty sure the red will make comparable power but better spool. You also wont need an exhaust manifold and o2 housing for the red.

 

+2 to what they said above

 

1)they will make about the same power
2)red will spool quicker
3)red will save you $1500-$2000
RED!!

 

Plus the red will look stock under the hood!

 

thats not always a good thing

 

i was caught up between the fp green, fp red and 3065...and now its down tothe green and red...the 3065 is too laggy for a DD. the red will spool quicker, and you will get the same numbers

FP red ftw

 

Ahh I disagree due to a HTA 3065 is comming...
35r wheel Vs. 30r wheel you do the math.

 

About the price difference i can get the 3065 for about the same as the red! People say the spool is fast dose anyone have any charts on both? How much fast would you say the spool will be?

 

RED FTW...ull love it

 

+1

 

I have a graph of the 3065 on a 2.0

 

Id get the red over the 3065 but to say the 3065 is laggy no way. However if you can get both turbos for the same price (Assuming that the 3065 is part of a kit) get the 3065 cause the opportunity is there down the road to bolt on another bigger turbo.

 

fp red if you are willing to wait till you get one