I"m using royal purple. All the mounts are good. I know there is something up with my clutch cause it won't go into gear.

 

royal purple sucks, use amsoil or penzoil syncromesh. If its not going in gear its the clutch master cylinder rod thats located right behind the clutch pedal. Read this thread: https://www.evolutionm.net/forums/ev...djustment.html

also check for oil down there also, the cylinder could have **** the bed, you never know. if that doesn't fix it then bleed the system.

 

Thanks I'll give that a shot when I get off of work.

 

throw out bearing

 

if it was the throw out bearing, it wouldn't be disengaging the clutch. I highly doubt his TOB is bad or disconnected from the wedge collar by reading his posts on here. Don't scare him.

 

Ok so I adjusted my pedal and that didn't work.