Ryu's hunting for 9's on the Stock Block
I believe $100 which is very comparable to what every other company charges. As you can see Judge Racing also does far more to the hotside then FP or BR in terms of how far they port the runners. My BR ported FP Red was no where near as wide open as the competitors porting.
I believe $100 which is very comparable to what every other company charges. As you can see Judge Racing also does far more to the hotside then FP or BR in terms of how far they port the runners. My BR ported FP Red was no where near as wide open as the competitors porting.
PM the locals when you hit the dyno. Maybe Brian will be interested in doing another dyno vid for your car again. I sure as hell want to be there when it makes power on the rollers.
Good stuff meng.
Good stuff meng.
Well, I don't plan to max out the turbo as of yet. I shouldn't need too. I think it's going to take 35psi to reach around the 610-620whp peak mark while maintaining approx. 40whp give or take over the Red on the top end. This is of course theoretical until the car is on the rollers but I am confident my estimation is going to prove very close to what the actual results will end up being. In more of a universal comparison term I expect the car to go from 133mph in the 1/4 mile with the Red to 137-138mph with the turbo and o2 housing changes with 5psi less boost.
Last edited by RyuEvoIX; Jan 27, 2010 at 08:15 AM.
I should have everything back any day now so the plan is to have the car back up and running by Saturday. Then next week the custom o2 housing will be fabed up. It's a safe bet the car should be on the dyno in 2 weeks.
