Acree's MAP 2.4L FP Black Build
E85 is a minimum of 105 octane is normally closer to 111. Depends on what they cut it with and if it is 85 or E70. A few places out here sell E85 that is actually E98 as well.
Synapse BOV sucks from what I have been told. Forge is a good recirc'd one if you want to keep it recirc'd. Other than the IAT, I agree with Mikey where I didnt already comment in PMs.
Aaron
Synapse BOV sucks from what I have been told. Forge is a good recirc'd one if you want to keep it recirc'd. Other than the IAT, I agree with Mikey where I didnt already comment in PMs.
Aaron
There is no such thing as a good recirc valve...unless you use the leaky stock 9 bov and run less than 25ish psi.
I recommend SD with a TiAL.
I've tried lots of combinations with no success using recirc's. I had the synapse....still sucked.
ER Speed Density conversion + TiAL 50mm...cured all my problems.
I recommend SD with a TiAL.
I've tried lots of combinations with no success using recirc's. I had the synapse....still sucked.
ER Speed Density conversion + TiAL 50mm...cured all my problems.
Acree,
I love my TiAL Alpha Q (TiAl "Bong" recirc BOV)... This was installed before I decided to go SD and will eventually go with a TiAL VTA BOV. Might be a good option to go with a Tial QR Blow Off Valve - Recirculating since you can run as recirc now, then go VTA later as an option. This Tial QR Blow Off Valve - Recirculating wasn't an option when I did my 2.3L build.
A nice feature of the TiAL QR BOV is that you can swap bottom with the bottom of a Q BOV to make it a fully vent to atmosphere BOV.
J. Church
I love my TiAL Alpha Q (TiAl "Bong" recirc BOV)... This was installed before I decided to go SD and will eventually go with a TiAL VTA BOV. Might be a good option to go with a Tial QR Blow Off Valve - Recirculating since you can run as recirc now, then go VTA later as an option. This Tial QR Blow Off Valve - Recirculating wasn't an option when I did my 2.3L build.
A nice feature of the TiAL QR BOV is that you can swap bottom with the bottom of a Q BOV to make it a fully vent to atmosphere BOV.
J. Church
Last edited by churchja; Jul 24, 2010 at 10:21 PM.
There is no such thing as a good recirc valve...unless you use the leaky stock 9 bov and run less than 25ish psi.
I recommend SD with a TiAL.
I've tried lots of combinations with no success using recirc's. I had the synapse....still sucked.
ER Speed Density conversion + TiAL 50mm...cured all my problems.
I recommend SD with a TiAL.
I've tried lots of combinations with no success using recirc's. I had the synapse....still sucked.
ER Speed Density conversion + TiAL 50mm...cured all my problems.
Mikey
E85 is a minimum of 105 octane is normally closer to 111. Depends on what they cut it with and if it is 85 or E70. A few places out here sell E85 that is actually E98 as well.
Synapse BOV sucks from what I have been told. Forge is a good recirc'd one if you want to keep it recirc'd. Other than the IAT, I agree with Mikey where I didnt already comment in PMs.
Aaron
Synapse BOV sucks from what I have been told. Forge is a good recirc'd one if you want to keep it recirc'd. Other than the IAT, I agree with Mikey where I didnt already comment in PMs.
Aaron
E98 is MON of 117 and RON of 129.
I did a post/write up on the exact octane rating of E85 and its various blends awhile ago-
https://www.evolutionm.net/forums/al...ter-blend.html
I did a post/write up on the exact octane rating of E85 and its various blends awhile ago-
https://www.evolutionm.net/forums/al...ter-blend.html
