Looking for piston too.... heard stroker pistion would work..I was told if I use 10.5cr stroker piston it would become 9.5cr on my 2.4 LR... is that true?

 

when you will order you pistons you should just tell the manufacturer what Block, crank, rods and what gasket you will use and was your head ever cut and ask for CR you want and you will get exactly what you want

 

Wiseco 1400HD for the piston.

Right now we are the only source for the 153mm and 159mm rods.

 

Wiseco HD for those combo...
U can go with JE,Manley or CP too

 

we bought 153mm from Carrillo also, and they can do any custom lenght

 

old thread. just randomly found it. i have R&R 159mm rods billet steel and have a set of 153 that will be here in the next week.

lots changed since this post. wiseco has HD2 pistons for LR 2.4's now on the shelf & stocked.

heres a cool pic i took of a R&R 159mm rod with L19 bolts next to a manley 150mm turbo tuff rod:

 

if you take a look at http://www.wiseco.com/Catalogs/Sport.../MiniMitsu.pdf

they have off the shelf 2.4LR pistons now. i have a few sets on order for me and a few customers right now.

go to that link and hit control + f and search for "hd2" and you will see the new stuff and non hd stuff.

supposedly they will start shipping the end of april i guess.

Aaron made a thread about this also awhile ago on the forum.