Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Fullblown 70mm TB - TPS adjustment

Thread Tools
 
Search this Thread
 
Old Apr 2, 2013 | 02:31 PM
  #1  
Graphic's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Jan 2010
Posts: 485
Likes: 0
From: Seattle
Fullblown 70mm TB - TPS adjustment

I have recently added a 70mm Fullblown TB. When I set WOT to read 100%, idle reads 23% ish at full sweep. If I set idle to 13.3% wot is maxed out at 92-95% on a full sweep as well. If I hook my tps up to my stock TB i have full sweep from 13.3% to 100%.

Has anyone tuned a stock ECU evo with the 70mm full blown? What is the resolution to this issue? I haven't started my car yet but I'd like to know what I need to do? I'm thinking there are settings that need to be changed in ECUFlash? Any help would be appreciated!
Reply
Old Apr 2, 2013 | 04:38 PM
  #2  
Graphic's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Jan 2010
Posts: 485
Likes: 0
From: Seattle
I know somebody knows this answer.... I need to know this so I can start my car and get it tuned.
Reply
Old Apr 2, 2013 | 05:17 PM
  #3  
211Ratsbud's Avatar
EvoM Guru
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2010
Posts: 4,286
Likes: 43
From: Watertown, NY
I did don't worry about wot reading just get your target idle in check and your idle tps at below 16%
Reply
Old Apr 2, 2013 | 05:18 PM
  #4  
Graphic's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Jan 2010
Posts: 485
Likes: 0
From: Seattle
Originally Posted by 211ratsbud
I did don't worry about wot reading just get your target idle in check and your idle tps at below 16%
Sweet! Thanks man. So my tuner will just tune out the fact it states 9X.xx % WOT? I can get 13.333 idle np.
Reply
Old Apr 2, 2013 | 05:20 PM
  #5  
211Ratsbud's Avatar
EvoM Guru
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2010
Posts: 4,286
Likes: 43
From: Watertown, NY
Yea that's it. I used to read 96 at wot.
Reply
Old Apr 2, 2013 | 11:44 PM
  #6  
Graphic's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Jan 2010
Posts: 485
Likes: 0
From: Seattle
Originally Posted by 211ratsbud
Yea that's it. I used to read 96 at wot.
Cool thanks again man!!
Reply
Old Apr 3, 2013 | 01:10 PM
  #7  
browningderek's Avatar
Evolved Member
iTrader: (7)
 
Joined: Feb 2007
Posts: 573
Likes: 0
From: MoTown,GA
Idle should read 14-17%... get that adjusted and wot tps reading doesn't matter. 98%, 100%, same thing.
Reply
Old Apr 3, 2013 | 01:20 PM
  #8  
badev0's Avatar
Evolved Member
iTrader: (74)
 
Joined: Jan 2008
Posts: 2,239
Likes: 40
From: Michigan
Mine is 12% at idle, 92-94% at WOT. As long as you're in the 90's at WOT you're fine.

Mine has no issues and drives like stock. I also run the full blown 70mm.
Reply
Old Apr 3, 2013 | 01:27 PM
  #9  
mdsevo06's Avatar
Evolved Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 1,432
Likes: 1
From: San Diego
Idle should always read 13.333, stock or Full Blown.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FullBlown
Evo Engine / Turbo / Drivetrain
88
Dec 30, 2018 04:06 PM
Sideck
ECU Flash
9
Apr 1, 2018 05:52 PM
wagonwes
General Engine Management / Tuning Forum
2
Aug 10, 2016 08:16 PM
neonglh
ECU Flash
124
Apr 16, 2015 06:18 AM
yellowevo82
Evo Engine / Turbo / Drivetrain
6
Aug 30, 2009 02:31 PM




All times are GMT -7. The time now is 06:19 AM.