im new to this forum...little help in deciding stroker kit using 4g63...im intrested to forge my motor with using 4g63 block...what options do i have ...2.2 would be ideal but not sure if i can use 4g63 block for that...?ideas are welcome

 

anyone with ideas

 

it really depends on your build bro. what turbo will you be running? run a 2.3 stroker with a fp black along with supporting mods.

 

If 2.2l is ideal for what you have planned (and you need to stay with the 4g63 block), look into a 94mm crank from any one of the major manufacturers (i.e. Manly, Cosworth, Jun, Tomei, Toda, Winberg, GSC, K1, etc.).

 

will be running 6466 turbo 1/4 mile...which setup is required to build 2.3

 

Theres a million and one threads on here about motor options.
Try seraching

 

what about eagle 94mm crank can that not handle 9500 rpm and 6466 high horse power?

 

Why the hell would you build a 2.3 for 1/4 mile?

Sounds like you need to do alot of researching.

1/4 mile racing is high rpm maximum power.
Look into one of these two options:

2.0= 4g63 block, 88mm crank, 150mm rods, standard pistons

2.1- 4g64 block, 88mm crank, 150mm rods, w.e 4g64 spec pistons are

 

im not looking into 2.3 .....im looking at 2.2 .which can be rev'd for 1/4mile