Evo 8 need some help on bottom and built
Evo 8 need some help on bottom and built
Motor is stock and has 135xxx all the mods I have is Gsc S1 cams, Mishimoto Intercooler, Greddy Type Rs BOV, Boost Control, Godspeed Suspension, Act Racing Clutch,
mainly wanting The car to handle its self on the streets
Hey Luis
Not sure what level youre tuned now but pushing this high mileage motor north of 500 Dynojet WHP is a big ask.
Are you in a position to consider a built motor that can handle 5-600 DynoJet HP?
If not, i would recommend going on E85 combined an FP Green or similar CFM turbo & get into the Mid-400's and call it good
What do you think?
Not sure what level youre tuned now but pushing this high mileage motor north of 500 Dynojet WHP is a big ask.
Are you in a position to consider a built motor that can handle 5-600 DynoJet HP?
If not, i would recommend going on E85 combined an FP Green or similar CFM turbo & get into the Mid-400's and call it good
What do you think?
Trending Topics
[QUOTE=MinusPrevious;11896158]Hey Luis
Not sure what level youre tuned now but pushing this high mileage motor north of 500 Dynojet WHP is a big ask.
Are you in a position to consider a built motor that can handle 5-600 DynoJet HP?
If not, i would recommend going on E85 combined an FP Green or similar CFM turbo & get into the Mid-400's and call it good
What do you think?[/QUOTE
should I buy another motor and build a lower mileage motor ? I need help pls this is going to be my first build so I want to do everything right the first time I have the money to but don’t know where to start
or can I use the one I got
Not sure what level youre tuned now but pushing this high mileage motor north of 500 Dynojet WHP is a big ask.
Are you in a position to consider a built motor that can handle 5-600 DynoJet HP?
If not, i would recommend going on E85 combined an FP Green or similar CFM turbo & get into the Mid-400's and call it good
What do you think?[/QUOTE
should I buy another motor and build a lower mileage motor ? I need help pls this is going to be my first build so I want to do everything right the first time I have the money to but don’t know where to start
or can I use the one I got
Many different paths can be taken. You can build the motor yourself if you have the time, experience, tools etc. You can have your current motor removed & sent to a builder like English Racing, Buschur, Boostin Perf etc
You can buy a pre-built bottom end (short block) from many different suppliers (English Racing). Check out their site first & when you have narrowed down your ideas, call them https://englishracing.net/
You can buy a pre-built bottom end (short block) from many different suppliers (English Racing). Check out their site first & when you have narrowed down your ideas, call them https://englishracing.net/
Thread
Thread Starter
Forum
Replies
Last Post







