could anyone give me a write up on how to install spark plugs...thanks

 

isn't it kinda self explanatory? Remove the spark plug cover, remove the coil packs, remove the plug wires, and remove the plugs... then reinstall in reverse.....

 

um.. what are the coil packs, and plug wires??
could someone tell me step by step? thanks

 

You know the plastic bit on top of your valve cover with Mitsubishi on it? Remove the 4 bolts/screws from that and lift it off. Underneath you will see your coil packs and wires. 2 coil packs, 4 wires. I think there's 3 bolts on each so undo those and lift the packs & boots out. You now have access to your 4 spark plugs.

 

okai..you know those black things on top of each spark plugs?? how do you take them out?? just pull them or screw them??

 

The black things are the boots for the plugs and they just pull straight up.

 

its prob best you not change them.... you may over tighten a bolt or loose something in the cylinders... not trying to be rude but i'm serious better safe then sorry

 

hey, if you dont know what things are under the hood I wouldnt change them myself.

 

yea thats true..its always good to learn though...im going to my mechanic tomorrow THANKS GUYS!