oil changes
#46
Newbie
Join Date: Oct 2012
Location: Wichita Falls, TX
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Good Stuff Bluedot!
The only things I think that need clarifiying in the step by step above are;
1. When replacing the oil drain plug, make sure you removed the old copper crush washer and that you replaced it with a new one. The oil drain plug washers are not reuseable.
SC~
The only things I think that need clarifiying in the step by step above are;
1. When replacing the oil drain plug, make sure you removed the old copper crush washer and that you replaced it with a new one. The oil drain plug washers are not reuseable.
SC~
#47
Evolved Member
iTrader: (3)
Join Date: Sep 2007
Location: Trinidad
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Crush washers can be had all over
It is usually stuck at the end of the threads on the drain plug
Once threads are good and hex part has square edges then drain plug doesn't need to be changed
It is usually stuck at the end of the threads on the drain plug
Once threads are good and hex part has square edges then drain plug doesn't need to be changed
#48
Newbie
Join Date: Oct 2012
Location: Wichita Falls, TX
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post