Is a 4.2 second 0-60 normal for this tune?

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2009 | 04:26 PM

#46

imdrew12

Thread Starter

Evolving Member

Joined: Apr 2009

Posts: 218

Likes: 0

From: rolla, missouri

I wanted to run a more in depth data log on how much boost I was running and when I was running it. How do I decipher the psi(boost) using the relative pressure log on the AP? It works just fine when I want to read it live, I have done the firmware update, I just want a decipherable log of it.

Seconds (sec) RPM (RPM) ECT ( F) TPS Voltage (V) Ign Advance ()
0 908 186.8 0.57 12

LTFT (%) Knock Retard (CA) WGDC Fine (%) MAF (g/s) (g/s)
-1.42 0 0 3.8

Abs. Pressure (PSI) Load Boost/Fuel (Load) Load Timing (Load)
5.08 20.94 22.5

Last edited by imdrew12; Jul 25, 2009 at 04:50 PM.

Jul 25, 2009 | 04:47 PM

#47

imdrew12

Thread Starter

Evolving Member

Joined: Apr 2009

Posts: 218

Likes: 0

From: rolla, missouri

Quote:

Originally Posted by tdubevox

223whp/243wtq baseline.

Quote:

Originally Posted by tdubevox

Geezevox's GSR dyno'd at 264whp/280wtq on cbrd's mustang dyno with the Perrin stg 1 and stock filter.

Hp is close to Perrin's claims but tq isnt. I know all dynos are different, but that's a big difference in my eyes.

Last edited by imdrew12; Jul 25, 2009 at 05:06 PM.

Jul 25, 2009 | 05:56 PM

#48

tdubevox

Newbie

iTrader: (2)

Joined: Jan 2009

Posts: 66

Likes: 0

From: NOVA

Quote:

Originally Posted by imdrew12

Hp is close to Perrin's claims but tq isnt. I know all dynos are different, but that's a big difference in my eyes.

whp is off approx 8%, wtq 12%. I think it could easily be the dyno's. It's still a great off the shelf map if you have the AP.

Jul 25, 2009 | 06:25 PM

#49

imdrew12

Thread Starter

Evolving Member

Joined: Apr 2009

Posts: 218

Likes: 0

From: rolla, missouri

double post

Jul 25, 2009 | 06:26 PM

#50

imdrew12

Thread Starter

Evolving Member

Joined: Apr 2009

Posts: 218

Likes: 0

From: rolla, missouri

Quote:

Originally Posted by tdubevox

whp is off approx 8%, wtq 12%. I think it could easily be the dyno's. It's still a great off the shelf map if you have the AP.

No doubt.

Jul 26, 2009 | 11:31 AM

#51

rehtea

Newbie

Joined: Jul 2008

Posts: 24

Likes: 0

From: MD

Quote:

Originally Posted by imdrew12

Ok, with a 1/4 tank of gas and 86 degree temp I ran another 4.20 and a 4.22. I am pretty happy. Now I need to see if it can handle a sub 4 second 0-60.

That's awesome. Now I'm seriously considering the 2010 MR.

Mar 5, 2010 | 12:46 PM

#52

imdrew12

Thread Starter

Evolving Member

Joined: Apr 2009

Posts: 218

Likes: 0

From: rolla, missouri

How many HP do you think it would take to get a sub 4 sec time? Not that I really care, its just for bragging rights. Probably a nice weight reduction wouldn't hurt. Too bad I am looking at adding around a 100lbs of stereo equipment.

Boy, I have poor self esteem.