Thanks so much for the instructions, they will come in handy for sure.

Any chance you could get an exact weight of the evaporator and anything that connects to it like part 5.

Thanks again

 

Hey ya'll, I wonder if an Evo RS would have a stopper for the firewall hole where the A/C lines enter into the Cabin.

it would be cool just to order that part from mitsubishi and not have to rig a stopper up.

 

good idea - check with spins4 and report back

 

it would need to be JDM RS part number.
USDM evo's still have AC

 

anyone know where I could find a JDM part number? I'd say the local mitsubishi place around here would just look at me weird if I asked for a JDM part lol

 

Bringing this back from the dead, but do you guys know if the ducting for a non-ac evo is different from an ac equipped evo? This is how it is on the older g-body vehicles, and you had to change out the entire ducting behind the dash, it was a different shape, different size, different controls etc.

 

not like ur gonna gain any noticeable hp from the a/c not on the car

 

Less weight, somewhat less rotational mass, but most importantly: more air through the IC & radiator for road racing. It's coming out of my winter beater ('05 Evo VIII) next week.