3rd Build, lets hope this is the final...Evo8

Reply Subscribe

Thread Tools

Search this Thread

Mar 11, 2024 | 12:02 PM

#151

osetsky

Evolved Member

Joined: Aug 2009

Posts: 844

Likes: 166

From: canada

Transmission issues suck.
Not as bad as electric though, so silver lining?

Mar 13, 2024 | 06:13 AM

#152

blackline

Thread Starter

Evolved Member

iTrader: (2)

Joined: Sep 2017

Posts: 767

Likes: 122

From: NYC

Quote:

Originally Posted by ViciousLSD

probably the fork is bent or needs a new clutch master cyl? braided line ( i cant remember if it had rubber hoses)? IIRC theres a restrictor/pill in the clutch line also

Going to look through the inspection hole to see if anything looks off. I've been debating on changing the clutch slave cylinder just for ****s since it's the original one(it does move when depressing the clutch pedal). Not sure how to test the master cylinder. I've got the SS line going from the master to the slave.

Quote:

Originally Posted by osetsky

Transmission issues suck.
Not as bad as electric though, so silver lining?

maybe, just maybe.

Last edited by blackline; Mar 13, 2024 at 06:26 AM.

Mar 13, 2024 | 07:17 AM

#153

jagboy125

Newbie

Joined: Mar 2013

Posts: 18

Likes: 4

From: Westchester NY

You should inspect your clutch pedal assembly some times they are known to crack and cause engagement issues

Apr 2, 2024 | 06:56 AM

#154

blackline

Thread Starter

Evolved Member

iTrader: (2)

Joined: Sep 2017

Posts: 767

Likes: 122

From: NYC

Update.

Clutch assembly is good.
Replaced Master and Slave, still locked out of all gears while the car is started. Going to jack up and peek though the inspection hole but will still end up dropping the trans to inspect everything. Wont be able to get this done until June ;(