use 100percent meth or 50/50

 

Any more data on 100% water?

 

100% water = less power
http://www.youtube.com/watch?v=los-PKsRxD0

 

That video doesn't show what a car tuned on straight water can really do. Big Al even admitted that the car was breaking up which is a symptom of too much water and too rich an AFR. Pure water injection loves lean AFR's. A real test would have been if he spent some time tuning that Evo on pure water before moving on to the alcohol.

 

All very true info

 

\buy hella meth and never run out

 

I'll sell you my HSF-5 kit off of my evo for 500 bucks!

 

To extract the most out of plain water injection you will need to run it a fair bit leaner to prevent misfiring. Some have gone a LOT leaner and finally picked up power. The problem with it is if you run low on water you could be up a creek.

Of course running out of 100% methanol or any other mixture also could be catastrophic.

I run blue washer fluid with a two stage injection. My oldest car (1993) washer bottle hasn't had any scum or odd buildup at all and it's had blue washer fluid all it's life. I really don't see a problem with washer fluid as long as you choose it carefully.

 

dont go too lean. made some power but torque was gooooooooooood LOL . . .

 

there was an australian guy on the rx7 forums running pre-turbo water injection and he made about 730 rwhp and 700 ft lbs. and he swears by his set up. no knocking or anything.